On Monday 08 May 2006 20:02, Lonni J Friedman escreveu o seguinte: > On 5/8/06, Josenildo Marques <josenildo.marques@xxxxxxxxx> wrote: > > On Monday 08 May 2006 19:44, Lonni J Friedman escreveu o seguinte: > > > On 5/8/06, Josenildo Marques <josenildo.marques@xxxxxxxxx> wrote: > > > > On Monday 08 May 2006 19:30, Lonni J Friedman escreveu o seguinte: > > > > > Try running: > > > > > ethtool -s eth0 duplex full > > > > > > > > The command was accepted. > > > > > > ok, so what does "ethtool eth0" show? > > > > # ethtool eth0 > > Settings for eth0: > > Supported ports: [ TP MII ] > > Supported link modes: 10baseT/Half 10baseT/Full > > 100baseT/Half 100baseT/Full > > Supports auto-negotiation: Yes > > Advertised link modes: 10baseT/Half 10baseT/Full > > 100baseT/Half 100baseT/Full > > Advertised auto-negotiation: No > > Speed: 100Mb/s > > Duplex: Full > > Port: MII > > PHYAD: 32 > > Transceiver: internal > > Auto-negotiation: off > > Supports Wake-on: pumbg > > Wake-on: d > > Current message level: 0x00000007 (7) > > Link detected: yes > > ok, you're at 100M/full now, which might be better. Does the problem > still reproduce? No, not at all ! So far so good. Thanks a million, Lonni. -- Josenildo Marques usuário Linux registrado No. 341648 blog http://monomito.wordpress.com/ ************************************* "When I picture a perfect reader, I always picture a monster of courage and curiosity, also something supple, cunning, cautious, a born adventurer and discoverer..." Friedrich Nietzsche *************************************
