On 5/8/06, Josenildo Marques <josenildo.marques@xxxxxxxxx> wrote:
On Monday 08 May 2006 19:44, Lonni J Friedman escreveu o seguinte:
> On 5/8/06, Josenildo Marques <josenildo.marques@xxxxxxxxx> wrote:
> > On Monday 08 May 2006 19:30, Lonni J Friedman escreveu o seguinte:
> > > Try running:
> > > ethtool -s eth0 duplex full
> >
> > The command was accepted.
>
> ok, so what does "ethtool eth0" show?
# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: No
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: off
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes
ok, you're at 100M/full now, which might be better. Does the problem
still reproduce?
> > > is BT causing the lockup immediately, or after some period of time?
> >
> > After some period of time...
>
> Why do you think that BT is causing the problem?
It only happens after BT is fired up. I have left the system running for a
long while and nothing went wrong. However, when BT is running, it seemed to
take some ten minutes or so for the system to lock up.
Handle 0x0000, DMI type 0, 20 bytes.
BIOS Information
Vendor: Award Software, Inc.
Version: ASUS A7S333 ACPI BIOS REVISION 1004
Release Date: 08/28/2002
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 256 kB
That would be a challenge :-)
I've never done it before.
1006 seems to be the latest version.
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
L. Friedman netllama@xxxxxxxxx
LlamaLand http://netllama.linux-sxs.org
