Le dimanche 16 avril 2006 à 10:18 -0700, Lonni J Friedman a écrit : > On 4/16/06, tiger <no-reply-gw@xxxxxxxxxxxxxxxxx> wrote: > > 2.6.16-1.2080_FC5smp > > gcc (GCC) 4.1.0 20060304 (Red Hat 4.1.0-3) > > spca5xx-20060402 > > > > Compiles and installs fine. Modprobe spca5xx works fine. Here's the /var/log/messages output of doing a "modprobe spca5xx": > > > > Apr 16 12:18:39 electron kernel: Linux video capture interface: v1.00 > > Apr 16 12:18:39 electron kernel: usbcore: registered new driver spca5xx > > Apr 16 12:18:39 electron kernel: /root/spca5xx-20060402/drivers/usb/spca5xx.c: spca5xx driver 00.57.11 registered > > > > Next, I plug in the camera, and /var/log/messages gives: > > > > > > Apr 16 12:20:33 electron kernel: usb 1-2: new full speed USB device using uhci_hcd and address 4 > > Apr 16 12:20:33 electron kernel: usb 1-2: configuration #1 chosen from 1 choice > > Apr 16 12:20:33 electron kernel: hub 1-2:1.0: USB hub found > > Apr 16 12:20:33 electron kernel: hub 1-2:1.0: 4 ports detected > > Apr 16 12:20:34 electron kernel: usb 1-2.4: new full speed USB device using uhci_hcd and address 5 > > Apr 16 12:20:34 electron kernel: usb 1-2.4: configuration #1 chosen from 1 choice > > Apr 16 12:20:34 electron kernel: /root/spca5xx-20060402/drivers/usb/spca5xx.c: USB SPCA5XX camera found. Type Creative Live! Zc301+Tas5130c > > Apr 16 12:20:34 electron kernel: /root/spca5xx-20060402/drivers/usb/spca5xx.c: [spca5xx_probe:8301] Camera type JPEG > > Apr 16 12:20:35 electron kernel: /root/spca5xx-20060402/drivers/usb/zc3xx.h: [zc3xx_config:530] Find Sensor HV7131R(c) > > Apr 16 12:20:35 electron kernel: /root/spca5xx-20060402/drivers/usb/spca5xx.c: [spca5xx_getcapability:2198] maxw 640 maxh 480 minw 176 minh 144 > > > > But when I run spcaview, it freezes the machine. For obvious reasons I can't cut-n-paste the screen output. Any ideas? > > Same problem here with FC5 & spca5xx on a Biostar motherboard. I had > a serial console setup, and saw some crazy kernel Oops everytime. I > emailed the spca5xx maintainer and he blew me off initially stating > that he only supports official kernel.org kernels. So I built an > official 2.6.16.1 kernel, and saw the same exact Oops all over again > (plus on my system it just spontaneously reboots, instead of hanging). > Now the maintainer is just ignoring my emails, which leads me to > believe that he doesn't know how to fix the problem. *sigh* > > Same problem here with FC5 and spca5xx on a asus (nvidia) motherboard. I sent an email to Michel Xhaard few weeks before and he answered me this problem seems fc5 specific because fc5 seems very buggy at least with its specific kernel! Since i obtain no answer and no solution to our problem. Eric
