Antonio Olivares <olivares14031@xxxxxxxxx> writes: > --- Leon <sdl.web@xxxxxxxxx> wrote: > >> Dear all, >> >> Just went out for a conference and lived in a hotel >> with only modem >> network. So frustrated not be able to communicate >> with my colleagues. >> >> I'd like to configure the modem and hope you help >> me. >> >> model type: Modem: Intel Corporation 82801DB/DBL/DBM >> (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) >> >> I have installed slmodem-alsa from livna repo but >> don't know what to >> do next. I add a new network hardware in >> system-config-network, but >> the device is always inactive. Any ideas? >> >> I haven't used a modem before so please give more >> details. >> >> Thank you. >> -- >> Leon >> >> -- >> fedora-list mailing list >> fedora-list@xxxxxxxxxx >> To unsubscribe: >> https://www.redhat.com/mailman/listinfo/fedora-list >> > > Modem: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) > > This modem might/might not be supported by > slmodemd-alsa which you downloaded/installed > slmodemd-alsa package from livna. > > Two things to do > > Case 1: > > # modprobe snd_intel8x0m > # slmodemd -c YOURCOUNTRY --alsa hw:1 > or > # slmodemd -c YOURCOUNTRY --alsa hw:0 > fire up another terminal/tab > # wvdialconf /etc/wvdial.conf > will try to find your modem port. If it does find it, > it will tell you modem found on /dev/ttySL0. and you > can try and configure a connection with KPPP or > proceed with wvdial. > > Case 2: > Modem: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) > has a Conexant Subsystem, which would NOT be supported > by snd-intel8x0m. > Go to > http://linmodems.technion.ac.il/#scanmodem > Please download scanModem.gz > $ gunzip scanModem.gz > $ chmod +x scanModem > $ su - > pswd: **** > # cd to directory where scanModem resides > and run > ./scanModem > and return the ModemData.txt to discuss@xxxxxxxxxxxxx > > > Regards, > > Antonio > Antonio, Thanks to your help, I have seen the modem recognized by fc5. ,---------[ wvdialconf output ] | Found a modem on /dev/ttySL0. | Modem configuration written to /etc/wvdial.conf. | ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" `------------------------------------ How to integrate it with networkmanager like the way wireless is integrated? Regards, -- Leon
