Tim,
have you also tried it as root?
Jo
Am Freitag, den 14.04.2006, 09:35 -0400 schrieb Tim Largy:
> My digital camera worked fine with FC3, but since upgrading to FC5
> I've had trouble. When I plug in my Canon PowerShot S200 via USB, the
> camera is detected (the Camera Import wizard pops up and correctly
> determines that photos are on the camera; when the camera is empty, it
> correctly determines that too), however in the next step I get:
>
> "An error occurred in the io-library ('Could not claim the USB
> device'): Could not claim interface 0 (Operation not permitted). Make
> sure no other program or kernel module (such as sdc2xx, stv680,
> spca50x) is using the device and you have read/write access to the
> device."
>
> Nothing bad appears in the log:
>
> # tail -f /var/log/messages
> Apr 14 08:35:10 divya kernel: usb 3-2: new full speed USB device using
> ohci_hcd and address 2
> Apr 14 08:35:10 divya kernel: usb 3-2: configuration #1 chosen from 1 choice
>
> The device isn't mounted as a drive anywhere:
>
> # ls /media
> cdrecorder/
>
> The device shows up in /proc/bus/usb/devices as:
>
> T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=32 #Cfgs= 1
> P: Vendor=04a9 ProdID=3065 Rev= 0.01
> S: Manufacturer=Canon Inc.
> S: Product=Canon Digital Camera
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=96ms
>
> None of the modules mentioned on the error message are loaded:
>
> # lsmod
>
> Module Size Used by
> ppdev 8645 0
> pcspkr 3653 0
> autofs4 19013 1
> hidp 15937 2
> l2cap 23617 5 hidp
> bluetooth 44069 2 hidp,l2cap
> sunrpc 136573 1
> ipt_REJECT 5441 1
> xt_state 2241 3
> ip_conntrack 49261 1 xt_state
> nfnetlink 6489 1 ip_conntrack
> xt_tcpudp 3265 5
> xt_mac 2241 1
> iptable_filter 3137 1
> ip_tables 11657 1 iptable_filter
> x_tables 12613 5 ipt_REJECT,xt_state,xt_tcpudp,xt_mac,ip_tables
> dm_mirror 19985 0
> dm_mod 50649 1 dm_mirror
> video 14917 0
> button 6609 0
> battery 9285 0
> ac 4933 0
> ipv6 225569 14
> lp 12296 0
> parport_pc 25445 1
> parport 34313 3 ppdev,lp,parport_pc
> floppy 57733 0
> nvram 8393 0
> ehci_hcd 29005 0
> ohci_hcd 19805 0
> snd_intel8x0 30301 2
> snd_ac97_codec 83937 1 snd_intel8x0
> snd_ac97_bus 2497 1 snd_ac97_codec
> snd_seq_dummy 3781 0
> snd_seq_oss 28993 0
> snd_seq_midi_event 7105 1 snd_seq_oss
> snd_seq 47153 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
> snd_seq_device 8909 3 snd_seq_dummy,snd_seq_oss,snd_seq
> snd_pcm_oss 45009 0
> snd_mixer_oss 16449 1 snd_pcm_oss
> snd_pcm 76869 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
> i2c_sis96x 5573 0
> i2c_core 20673 1 i2c_sis96x
> snd_timer 22597 2 snd_seq,snd_pcm
> sis900 21953 0
> mii 5313 1 sis900
> snd 50500 13
> snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
> soundcore 9377 1 snd
> snd_page_alloc 10441 2 snd_intel8x0,snd_pcm
> ext3 116169 3
> jbd 52693 1 ext3
>
> What should I try next?
>
> Tim
>
--
Joachim Kunze
Alte Marktstrasse 16 eMail: joachim@xxxxxxxxxxxxx
D-71665 Horrheim Tel: +49 7042-830006
