> 2006/4/9, Nader Mirzaee :
> >> -------------------------------------------------
> >>> this is the output of lspci :
> >>>
> >>> 02:0b.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III]
> >> (rev
> >>> 8b)
> >>> 02:0d.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev
> >> 10)
> >> -------------------------------------------------------------------
> >> can you post also your /etc/modprobe.conf file?? The card is
> >> recognized as Via...maybe it is already working ;-)
> >> ----------------------------------------------------------
> >> yes obviously it is recognized ;-) this is my modprobe.conf
> >>
> >> alias snd-card-0 snd-cmipci
> >> options snd-card-0 index=0
> >> options snd-cmipci index=0
> >> remove snd-cmipci { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; };
> >> /sbin/modprobe -r --ignore-remove snd-cmipci
> >> alias eth0 ueagle-atm
> >>
> >> please notice that I have an adsl usb modem
> >> (ueagle-atm)connected to the usb port
> >
> > I am a little bit confused as you should have something like this:
> >
> > alias eth0 via-rhine
> >
> > eth0 is the ethernet card, not the Usb modem...
> >
> The DSL modem would look like an Ethernet card to the system. What
> he needs is something like:
>
> alias eth1 via-rhine
>
> That way, the DSL modem will be eth0, and the NIC will be eth1.
>
> Mikkel
> --
> --
Michael
you are right, but I mean that I should have installed FC5 with no USB
device connected, and then...after install I would have connected
modem etc..
------------------------------------------------------------
I unplugged the dsl modem and now my modprobe.conf looks like this:
alias snd-card-0 snd-cmipci
options snd-card-0 index=0
options snd-cmipci index=0
remove snd-cmipci { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-cmipci
New Yahoo! Messenger with Voice. Call regular phones from your PC and save big.
