Re: FC5 : Failed to allocate memory resource

[Dan <grinnz@xxxxxxxxx>]

Gavin Li wrote:
> I just installed FC5 on my brandnew PC, It prompts the following 
> message when booting up:
>
>  
>
> Uncompressing liux kernel  OK
>
> PCI: Failed to allocate memory resource #6 : 20000:50000000 for 0:01:00.0
>
>  
>
> I did a lspci after bootup:
>
> # uname -r
>
> 2.6.15-1.2054_FC5smp
>
> # lspci
>
> 00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub
>
> 00:01.0 PCI bridge: Intel Corporation 945G/P PCI Express Graphics Port
>
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High 
> Definition Audio Controller (rev 01)
>
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express 
> Port 1 (rev 01)
>
> 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express 
> Port 3 (rev 01)
>
> 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express 
> Port 4 (rev 01)
>
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB 
> UHCI #1 (rev 01)
>
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB 
> UHCI #2 (rev 01)
>
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB 
> UHCI #3 (rev 01)
>
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB 
> UHCI #4 (rev 01)
>
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 
> EHCI Controller (rev 01)
>
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
>
> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC 
> Interface Bridge (rev 01)
>
> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE 
> Controller (rev 01)
>
> 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) 
> Serial ATA Storage Controllers cc=IDE (rev 01)
>
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller 
> (rev 01)
>
> 01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 
> 6600] (rev a2)
>
> 05:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 
> IEEE-1394a-2000 Controller (PHY/Link)
>
> 05:08.0 Ethernet controller: Intel Corporation 82801G (ICH7 Family) 
> LAN Controller (rev 01)
>
> #
>
>  
>
> Is this mean the "01:00.0 VGA compatible controller: nVidia 
> Corporation NV43 [GeForce 6600] (rev a2)" is bad?
>
>  
>
>  
>
> Gavin
Does it boot? If it does, I wouldn't worry too much about it; I get this 
for both the old and new video card in my desktop, and Doom 3 and Quake 
4 still run excellently.
-Dan