Re: Wiring help?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 3 Apr 2006, Dan Track wrote:

On 4/3/06, Joel Jaeggli <joelja@xxxxxxxxxxxxxxxxxxxx> wrote:
On Mon, 3 Apr 2006, Dan Track wrote:

Hi

I appreciate this is OT but could some one guide me to some
documentation that describes the difference between structured and
unstructured cabling. Basically I just bought some cabling to attach
my server to the switch, but someone just told me that what I bought
was structured cabling and not good for this type of job.

someone has their terminology screwed up.

A structured cabling system is one layed out in a consistent hierarchical
system. An unstructured cable plant is one where every time you need to
connect two devices you ran another jumper/fiber/patch etc.

Also should the switch to server wiring be shielded or unshielded?

If this is ethernet, 10/100/1000 base-t it runs over unshielded category 5
twisted pair cable.

Getting back to the original statement. in-wall wiring in most places has
to be plenum rated to meet building codes, in addition most of the time
premisis wiring  is done with solid copper rather than stranded (which is
more flexible and is used for jumpers.

If you have two devices sitting right next to each other, you just connect
them with a jumper.

Thanks for your patience
Dan


Hi

Thanks very much for your advice. I appreciate it.

Could you elaborate on the stranded v non-stranded cabling. What are
the key differences. Should I order stranded cabling to connect a
switch and server?

A cat-5 twisted pair cable is 4 pairs (8 wires). The wire comes in two flavors in general, a 26 gauge solid conductor, or a 26 guage stranded wire (which is composed of smaller gauge wire twisted together. solid wire is less flexible, costs a little less, and is a bit easier crimp than stranded (though at one point I was pretty good at crimping stranded). stranded is more durable if subjected to lots of motion, solid is more durable in long term instalations because it has less surface area to oxidize.

Your jumper will almost certainly be stranded.


Thanks again
Dan



--
--------------------------------------------------------------------------
Joel Jaeggli  	       Unix Consulting 	       joelja@xxxxxxxxxxxxxxxxxxxx
GPG Key Fingerprint:     5C6E 0104 BAF0 40B0 5BD3 C38B F000 35AB B67F 56B2


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux