On Saturday 25 March 2006 14:57, fredex wrote: >On Sat, Mar 25, 2006 at 08:30:28AM -0500, Claude Jones wrote: >> On Thu March 23 2006 7:55 am, Gene Heskett wrote: >> > but the real fix is a new >> > mouse. >> >> Drum roll, crescendo, silence - "Andddddddddddd, the prize goes to >> fellow-geezer, Gene Heskett!" >> >> Installed a new mouse in the home machine, last night. Immediately >> noticed a tactile difference - a more solid feel as I pressed down >> the buttons... And, the double-click behavior seems to have stopped. >> It's still early, but I've browsed through a lot of mail, now, and >> there has been no uncertainty - the mouse is doing what I tell it to >> do... > >As mechanical switches make or break contact, there is a certain > amount of "bounce", where the make or break is not a single concrete > event, but a transition of short make/break events and a lot of > noise. In the circuitry that they drive is "de-bounce" logic. I > suppose it is possible that as a switch ages, the amount of noise > that occurs during the make/break event may go up sufficiently to > overload the debounce logic. Or maybe not. I'm no hardware designer, > so perhaps I'm soaking wet. Well, slightly damp anyway :) That sort of stuff is normally so overkilled the switch has to be really really flaky for it to get thru. This effect is from pushing the switch leg down into the hole, and pushing the solder & copper disk on the far side of the hole, away from the board far enough to break the connection there. And its broken for the duration of the fingers press, an eon in debounce circuitry time. -- Cheers, Gene People having trouble with vz bouncing email to me should add the word 'online' between the 'verizon', and the dot which bypasses vz's stupid bounce rules. I do use spamassassin too. :-) Yahoo.com and AOL/TW attorneys please note, additions to the above message by Gene Heskett are: Copyright 2006 by Maurice Eugene Heskett, all rights reserved.
