Hi, I installed a FC4 box, and tried to use smartctl to show disk parameters on SATA drives, or SATA drives connected through 3Ware RAID5 card, but neither works, my smartctl version is 5.33. my kernel is 2.6.15-1.1831_FC4smp. I added two "-T permissive" but still no luck. Any suggestion are greatly appreciated. Thanks. [root@testbox01 ~]# lspci | grep RAID 03:01.0 RAID bus controller: 3ware Inc 9xxx-series SATA-RAID [root@testbox01 ~]# lspci -n |grep 03:01.0 03:01.0 Class 0104: 13c1:1002 [root@testbox01 ~]# rpm -qf /usr/sbin/smartctl smartmontools-5.33-1.5 [root@testbox01 ~]# uname -r 2.6.15-1.1831_FC4smp [root@testbox01 ~]# smartctl -a -d 3ware,1 /dev/sda smartctl version 5.33 [x86_64-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ WARNING - NO DEVICE FOUND ON 3WARE CONTROLLER (disk 1) Smartctl: Device Read Identity Failed (not an ATA/ATAPI device) A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
