Gene Heskett wrote:
And someone else quoted the last two in reverse. Can someone PLEASE go
get one of these friggin cables and settle the argument? Good color
vision required of course :)
I just pulled a draft copy of the ANSI ATAPI document off the web,
and this is the wording...
The connector in the center of the cable assembly labeled Device 1
Connector is optional. The System Board connector shall have a blue base
and a black or blue retainer. The Device 0 Connector shall have a black
base and a black retainer. The Device 1 Connector shall have a gray base
and a black or gray retainer.
And if that's not good enough for you, a couple of months ago
I bought a brand new cable, and the connectors are MB blue with
black retainer, Slave grey with black retainer (grey is same color
as the cable) and the Master is black with a black retainer.
Mike
--
p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);}
This message made from 100% recycled bits.
You have found the bank of Larn.
I can explain it for you, but I can't understand it for you.
I speak only for myself, and I am unanimous in that!
