On Wed, 2006-01-11 at 09:27 -0800, M. Barnabas Luntzel wrote: > On Jan 11, 2006, at 1:41 AM, Gilboa Davara wrote: > > > On Tue, 2006-01-10 at 17:43 -0800, M. Barnabas Luntzel wrote: > >> Ever since I was upgraded (by smart) to 2.6.14, I have not been able > >> to boot any of these kernels. vmlinuz-2.6.13-1.1532_FC4 works fine so > >> I've at least had a working system. vmlinuz-2.6.14-1.1656_FC4 as well > >> as vmlinuz-2.6.14-1.1653_FC4 bomb out on boot with these messages: > >> > >> > >> Booting 'Fedora Core (2.6.14-1.1656_FC4)' > >> > >> root (hd0,0) > >> Filesystem type is ext2fs, partition type 0x83 > >> kernel /boot/vmlinuz-2.6.14-1.1656_FC4 ro root=LABEL=/ quiet > >> [Linux-bzimage, setup=0x1e00, size=0x178b66] > >> initrd /boot/initrd-2.6.14-1.1656_FC4.img > >> [Linux-initrd @ 0x37ec7000, 0x128125 bytes] > >> > >> Uncompressing Linux... OK, booting the kernel. > >> Red Hat nash version 4.2.15 starting > >> mkrootdev: label / not found > >> mount: error 2 mounting ext3 > >> ERROR opening /dev/console!!!!: 2 > >> error dup2'ing fd of 0 to 0 > >> error dup2'ing fd of 0 to 1 > >> error dup2'ing fd of 0 to 2 > >> switchroot: mount failed: 22 > >> Kernel panic - not syncing: Attempted to kill init! > >> > >> is this some sort of udev problem? I've googled this to death and I > >> cant find any resolution. tried giving different parameters to the > >> boot line to no effect. > >> explicitly setting root=/dev/sda1 did not work. it's an SATA > >> drive...what gets me is that 2.6.13 worked fine, but any 2.6.14 is > >> borked. so that indicates to me that the label on the disk is fine. > >> the boot parameters for my 2.6.13 are identical. > >> > >> perhaps support for my SATA controller was removed? it seems > >> doubtful. SiL 3114 SATA Raid PCI card. The difference between the 13 > >> and 14 boot seems to be at the line right after "Red Hat nash version > >> 4.2.15 starting". the 13 gets to INIT, and the 14 bombs on mkrootdev. > >> It also seems less likely that ext3 support was taken out of > >> 2.6.14 :)...I'm a little nervous about removing udev as it seems > >> 2.6.13 uses it and I'd like to have a somewhat working system. > >> > >> thanks for any help and sorry if I've left any important information > >> out. > >> > > > > Can you post your complete machine configuration. > > Motherboard, memory, etc. > > > mobo: Asus A7V880 KT880 > RAM: 1 GB single-channel PC3200 DDR400 (2x512 dimms) > > /proc/cpuinfo : > > processor : 0 > vendor_id : AuthenticAMD > cpu family : 6 > model : 8 > model name : AMD Athlon(tm) > stepping : 1 > cpu MHz : 1250.252 > cache size : 256 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 1 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge > mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow > bogomips : 2506.12 I'm having a rather similar problem with my Dual Opteron / SCSI machine. At least in my case 2.6.14/15 seem to have changed something that breaks the PCI scan on ACPI machines. As far as I could see (by adding printks) to the kernel, the PCI scan doesn't see most of the bus bridges and devices on my machine. I'm not sure, but your problem seems very similar to mine. Did you try using a vanilla kernel instead? Gilboa
