Jeff Vian wrote:
On Sun, 2005-12-11 at 23:00 -0500, Terry Polzin wrote:
On Sunday December 11 2005 20:52, David J. Bakeman wrote:
I have a external firewire drive formatted as ext3 under RH7.2. When I
plug it in to my new FC4 machine it complains with the following:
FAT: Did not find valid FSINFO signature.
Found signature1 0x00000000 signature2 0x00000000 (sector = 1)
FAT: Filesystem panic (dev sdb1)
invalid access to FAT (entry 0x00c0000f)
File system has been set read-only
I have to manually mount it as ext3 and everything is fine. I have two
other external firewire drives one formatted FAT32 and the other ext3
both of these are recognized correctly and automatically mounted.
Here's the output from fdisk for the drive that isn't recognized:
Disk /dev/sdc: 203.9 GB, 203927060480 bytes
255 heads, 63 sectors/track, 24792 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 24792 199141708+ 83 Linux
Any ideas??
Interesting that the error about FAT above is on /dev/sdb1 and you
showed the fdisk output from /dev/sdc.
Are you sure you are looking at the error on the proper drive.?
Yea sorry I had connected another drive inbetween the two tests.
When was the last time fsck was run against the partition
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
