On Sun, 2005-12-11 at 23:00 -0500, Terry Polzin wrote: > On Sunday December 11 2005 20:52, David J. Bakeman wrote: > > I have a external firewire drive formatted as ext3 under RH7.2. When I > > plug it in to my new FC4 machine it complains with the following: > > > > FAT: Did not find valid FSINFO signature. > > Found signature1 0x00000000 signature2 0x00000000 (sector = 1) > > FAT: Filesystem panic (dev sdb1) > > invalid access to FAT (entry 0x00c0000f) > > File system has been set read-only > > > > > > I have to manually mount it as ext3 and everything is fine. I have two > > other external firewire drives one formatted FAT32 and the other ext3 > > both of these are recognized correctly and automatically mounted. > > Here's the output from fdisk for the drive that isn't recognized: > > > > Disk /dev/sdc: 203.9 GB, 203927060480 bytes > > 255 heads, 63 sectors/track, 24792 cylinders > > Units = cylinders of 16065 * 512 = 8225280 bytes > > > > Device Boot Start End Blocks Id System > > /dev/sdc1 1 24792 199141708+ 83 Linux > > > > > > Any ideas?? Interesting that the error about FAT above is on /dev/sdb1 and you showed the fdisk output from /dev/sdc. Are you sure you are looking at the error on the proper drive.? > When was the last time fsck was run against the partition > > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
