I would replace the video card but the machine only has a half height slot, and I don't have a spare half height card, so If I can get the inbuilt 815 working properly, would be good. -----Original Message----- From: fedora-list-bounces@xxxxxxxxxx [mailto:fedora-list-bounces@xxxxxxxxxx] On Behalf Of Michael Wright Sent: Friday, 14 January 2005 10:24 PM To: For users of Fedora Core releases Subject: Re: Intel 815 Video Chipset Hi Craig I wouldn't use a intel 815 videochip set had ne in my system and they are shit. ----- Original Message ----- From: "Craig Preston" <c.preston@xxxxxxxxxxxxx> To: "For users of Fedora Core releases" <fedora-list@xxxxxxxxxx> Sent: Monday, November 14, 2005 10:10 PM Subject: RE: Intel 815 Video Chipset The machine is fully updated. The Option "noaccel" didn't make any difference and I have removed it from the config file again. Craig -----Original Message----- From: fedora-list-bounces@xxxxxxxxxx [mailto:fedora-list-bounces@xxxxxxxxxx] On Behalf Of Jim Cornette Sent: Monday, 14 November 2005 10:07 PM To: For users of Fedora Core releases Subject: Re: Intel 815 Video Chipset Craig Preston wrote: >I think I spoke to soon. It only seems to work properly at lower >resolutions. However the higher resolutions work fine under windows, so >I know the card can support them. > >-----Original Message----- >From: fedora-list-bounces@xxxxxxxxxx >[mailto:fedora-list-bounces@xxxxxxxxxx] On Behalf Of Craig Preston >Sent: Monday, 14 November 2005 3:15 PM >To: For users of Fedora Core releases >Subject: RE: Intel 815 Video Chipset > >Changed my monitor settings and it now seems to be OK. It was detected >as a generic monitor, but I chaged it to the actual model. > >thanks > >-----Original Message----- >From: fedora-list-bounces@xxxxxxxxxx >[mailto:fedora-list-bounces@xxxxxxxxxx] On Behalf Of Bill Perkins >Sent: Monday, 14 November 2005 2:52 PM >To: For users of Fedora Core releases >Subject: Re: Intel 815 Video Chipset > >Craig Preston wrote: > > >>I have just installed FC4 on a Dell GX150 that has an onboard Intel >>815 chipset. X does work, however there are all vertical lines that >>flicker and it seems to be a lot jerkier than it should. >> >>I found on some forums to add the Option = "noaccel" to the device >>section of the xorg.conf file, however this hasn't fixed it. Has >>anyone else seen or fixed this problem? >> >>Cheers, >> >>Craig >> >> >> > >I have an 815 chipset, and I've seen the symptoms you describe. I had >to tweak the xorg.conf file to get it to work right- make sure the >configuration program didn't put some insane values in the video >section. > >-- >----------------------------------------------------------------------- >- >------- >"The two most common things in the | Bill Perkins > universe are Hydrogen and Stupidity." | perk@xxxxxxx > | programmer-at-large > F. Zappa | ALL assembly languages done >here. >----------------------------------------------------------------------- >- >------- > >-- >fedora-list mailing list >fedora-list@xxxxxxxxxx >To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > >-- >fedora-list mailing list >fedora-list@xxxxxxxxxx >To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > > > If you are fully updated to the latest rpms for FC4, X should be fairly decent. I run FC4 on a computer with 1280x1024 resolution. I use 24 depth which works great for 2-D applications. The Option "NoAccel" option was needed for a refresh problem with the driver awhile back. (FC3 era, I believe). You will probably do better without having "NoAccel" added to xorg.conf Jim -- If Windows sucked it would be good for something. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
