Craig Preston wrote:
I think I spoke to soon. It only seems to work properly at lower
resolutions. However the higher resolutions work fine under windows, so
I know the card can support them.
-----Original Message-----
From: fedora-list-bounces@xxxxxxxxxx
[mailto:fedora-list-bounces@xxxxxxxxxx] On Behalf Of Craig Preston
Sent: Monday, 14 November 2005 3:15 PM
To: For users of Fedora Core releases
Subject: RE: Intel 815 Video Chipset
Changed my monitor settings and it now seems to be OK. It was detected
as a generic monitor, but I chaged it to the actual model.
thanks
-----Original Message-----
From: fedora-list-bounces@xxxxxxxxxx
[mailto:fedora-list-bounces@xxxxxxxxxx] On Behalf Of Bill Perkins
Sent: Monday, 14 November 2005 2:52 PM
To: For users of Fedora Core releases
Subject: Re: Intel 815 Video Chipset
Craig Preston wrote:
I have just installed FC4 on a Dell GX150 that has an onboard Intel
815 chipset. X does work, however there are all vertical lines that
flicker and it seems to be a lot jerkier than it should.
I found on some forums to add the Option = "noaccel" to the device
section of the xorg.conf file, however this hasn't fixed it. Has
anyone else seen or fixed this problem?
Cheers,
Craig
I have an 815 chipset, and I've seen the symptoms you describe. I had to
tweak the xorg.conf file to get it to work right- make sure the
configuration program didn't put some insane values in the video
section.
--
------------------------------------------------------------------------
-------
"The two most common things in the | Bill Perkins
universe are Hydrogen and Stupidity." | perk@xxxxxxx
| programmer-at-large
F. Zappa | ALL assembly languages done
here.
------------------------------------------------------------------------
-------
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
If you are fully updated to the latest rpms for FC4, X should be fairly
decent. I run FC4 on a computer with 1280x1024 resolution. I use 24
depth which works great for 2-D applications. The Option "NoAccel"
option was needed for a refresh problem with the driver awhile back.
(FC3 era, I believe). You will probably do better without having
"NoAccel" added to xorg.conf
Jim
--
If Windows sucked it would be good for something.
