On 10/18/05, captnemotx@xxxxxxxxxxxx <captnemotx@xxxxxxxxxxxx> wrote: > Hi, > I'm new to the list so my question may have been answered previously. > I just upgraded from FC2 to 4. I've got an IBM clone computer with an > Abit KT7A Raid motherboard, 1GB of RAM, AMD Athlon 1GHz processor, DSL > connection to the Internet with a D-Link DI-604 Broadband/Ethernet > router connecting 4 computers on my home network. > > After I finished upgrading to FC4 I tried checking for updates by > running up2date but got error messages. Checking further, it appears > that the machine is not connecting to the Internet (I can't call up any > other Web sites). I checked the Internet Connection Wizard and it is > only giving me the option to connect using a static IP Address rather > than an automatically obtained address using DHCP (which I had been > using under FC2 just fine). I *do* have a static IP Address and > usually run an Internet/e-mail server on another computer but it has > been down lately due to hardware problems). The Ethernet card in the > machine shows to be active. > > Any suggestions? Thanks for any help. You may e-mail me direct if you > wish. can you post the output to the following commands (as root)? ifconfig route -n cat /etc/resolv.conf service network status cat /etc/sysconfig/network-scripts/ifcfg-* that should help to diagnose the problem
