Re: udev - treo - FC-3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday 04 October 2005 16:04, Craig White wrote:
> On Tue, 2005-10-04 at 17:20 -0400, David Hollis wrote:
> > On Tue, 2005-10-04 at 14:15 -0700, Craig White wrote:
> > > just got a new treo 650
> > >
> > > trying to hot-sync but can't get out of box as it doesn't
> > > initialize /dev/ttyUSX
> > >
> > > I plug it in and press the hotsync and dmesg & /var/log/messages notice
> > > it's presence...
> > >
> > > Oct  4 13:45:52 lin-workstation kernel: usb 3-3: new full speed USB
> > > device using ohci_hcd and address 5
> > > Oct  4 13:47:19 lin-workstation kernel: usb 3-3: USB disconnect,
> > > address 5
> > > Oct  4 13:50:56 lin-workstation kernel: ohci_hcd 0000:00:02.1: wakeup
> > > Oct  4 13:50:56 lin-workstation kernel: usb 3-3: new full speed USB
> > > device using ohci_hcd and address 6
> > > Oct  4 13:53:06 lin-workstation kernel: usb 3-3: USB disconnect,
> > > address 6
> > > Oct  4 13:53:10 lin-workstation kernel: ohci_hcd 0000:00:02.1: wakeup
> > > Oct  4 13:53:10 lin-workstation kernel: usb 3-3: new full speed USB
> > > device using ohci_hcd and address 7
> > > Oct  4 13:55:21 lin-workstation kernel: usb 3-3: USB disconnect,
> > > address 7
> >
> > Looks like visor isn't picking it up.  While the device is trying to
> > hotsync, run a /sbin/lsusb to see what the PID/VID is for it.  It may
> > need to be added to visor.  You should be able to load visor by hand
> > adding 'product=0x???? vendor=0x????' substituting the appropriate
> > values from lsusb and it may pick it up.
>
> ----
> applied Windows solution (reboot) and that somewhat helped. Now it
> definitely shows up as /dev/ttyUSB0 & /dev/ttyUSB1 (hooray - I knew
> without that, it would be hopeless).
>
> # cat /etc/udev/rules.d/10-udev.rules
>
> BUS="scsi", SYSFS{model}="iPod            ", KERNEL="sdp2", NAME="%k",
> SYMLINK="ipod"
>
> BUS="usb", SYSFS{product}="Palm*", KERNEL="ttyUSB*", SYMLINK="pilot"
>
> # cat /etc/udev/permissions.d/10-udev.permissions
> pilot*:craig:usb:0666
> ttyUSB1:$local:uucp:0660
>
> clearly should work...but still struggling here...
>
> # pilot-xfer -p /dev/pilot -L
>
>
>    Listening to port: /dev/pilot
>
>    Please press the HotSync button now...
>    Error accepting data on /dev/pilot
>
> ;-(
>
> getting closer though - thanks Kevin/Dave
>
> Craig
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.


I'm no udev expert. However my filenames differ from yours in that my 
filenames are :
 /etc/udev/rules.d/10-visor.rules
 /etc/udev/permissions.d/10-visor.permissions

maybe its no big deal. I have the udev rules/permissions files as well but 
with significantly different content.




[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux