just got a new treo 650 trying to hot-sync but can't get out of box as it doesn't initialize /dev/ttyUSX I plug it in and press the hotsync and dmesg & /var/log/messages notice it's presence... Oct 4 13:45:52 lin-workstation kernel: usb 3-3: new full speed USB device using ohci_hcd and address 5 Oct 4 13:47:19 lin-workstation kernel: usb 3-3: USB disconnect, address 5 Oct 4 13:50:56 lin-workstation kernel: ohci_hcd 0000:00:02.1: wakeup Oct 4 13:50:56 lin-workstation kernel: usb 3-3: new full speed USB device using ohci_hcd and address 6 Oct 4 13:53:06 lin-workstation kernel: usb 3-3: USB disconnect, address 6 Oct 4 13:53:10 lin-workstation kernel: ohci_hcd 0000:00:02.1: wakeup Oct 4 13:53:10 lin-workstation kernel: usb 3-3: new full speed USB device using ohci_hcd and address 7 Oct 4 13:55:21 lin-workstation kernel: usb 3-3: USB disconnect, address 7 but it never gets there - while I am running hotsync.... # udevinfo -p /sys/class/tty/ttyUSB1 -a couldn't get the class device # ls -l /sys/bus/usb/devices/ total 0 lrwxrwxrwx 1 root root 0 Oct 4 13:48 1-0:1.0 - > ../../../devices/pci0000:00/0000:00:02.2/usb1/1-0:1.0 lrwxrwxrwx 1 root root 0 Oct 4 13:48 2-0:1.0 - > ../../../devices/pci0000:00/0000:00:02.0/usb2/2-0:1.0 lrwxrwxrwx 1 root root 0 Oct 4 13:48 3-0:1.0 - > ../../../devices/pci0000:00/0000:00:02.1/usb3/3-0:1.0 lrwxrwxrwx 1 root root 0 Oct 4 14:08 3-3 - > ../../../devices/pci0000:00/0000:00:02.1/usb3/3-3 lrwxrwxrwx 1 root root 0 Oct 4 14:08 3-3:1.0 - > ../../../devices/pci0000:00/0000:00:02.1/usb3/3-3/3-3:1.0 lrwxrwxrwx 1 root root 0 Oct 4 13:48 usb1 - > ../../../devices/pci0000:00/0000:00:02.2/usb1 lrwxrwxrwx 1 root root 0 Oct 4 13:48 usb2 - > ../../../devices/pci0000:00/0000:00:02.0/usb2 lrwxrwxrwx 1 root root 0 Oct 4 13:48 usb3 - > ../../../devices/pci0000:00/0000:00:02.1/usb3 [root@lin-workstation usb]# ls -l /etc/udev/rules.d/ total 24 [root@lin-workstation rules.d]# ls -l /dev/ttyU* ls: /dev/ttyU*: No such file or directory I don't see anything in bugzilla that strikes me but I did see this... http://www.opensubscriber.com/message/linux-usb- devel@xxxxxxxxxxxxxxxxxxxxx/2063684.html which seems awfully similar Any ideas? Anyone using a Treo 650 w/ FC-3? Craig -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
