Thomas Taylor wrote:
On Saturday 24 September 2005 18:43, david walcroft wrote:
Markku Kolkka wrote:
david walcroft kirjoitti viestissään (lähetysaika sunnuntai, 25.
syyskuuta 2005 00:37):
# If the UPS is locally attached set it to "yes"
SERVER=yes
# Model of the UPS (filename to call for it, without path)
# Example - one of
# apcsmart - APC SMartUPS and similar
# fentonups - Fenton UPS
# optiups
# bestups
# genericups
# ups-trust425+625
# upsdrvctl
# You MUST change this, or set SERVER to "no"
# To support multiple drivers, set MODEL=upsdrvctl
MODEL=Powermate-3105
The "MODEL" parameter does _not_ mean the actual model of your
ups, you must set it to the nut driver used for your UPS (or
"upsdrvctl").
# UPS device - needed if UPS is locally attached
DEVICE=/dev/ttyS0
Wasn't your UPS connected through USB, not the serial port?
Ok, I'll set up with MODEL=genericups, but I'm not sure what USB uses
for connections <socket> <port> and how to determine the same for a
config file.
Thanks for all you help Markku.
david
-- To find out where udev is putting your ups, as root run
"tail /var/log/message" after plugging the ups into the usb socket, the entry
you want will probably contain /dev/ttyUSB1..4. But be warned, it may not
always be loaded as the same usb device depending on other usb devices being
plugged or unplugged.
You will probably have to write a rule for your ups. Take a look at the man
page for udev and examine the existing rules in /etc/udev/rules.d to get the
idea. It would be a good idea to create a "file" under /dev, sav /dev/ups,
and put a symlink pointing to it in the rule.
Hope this helps,
Tom
Oops: Looks like I made a mistake on the rules location the first time I sent
this. It's corrected above.
-
Tom Taylor
Linux user #263467
Federal Way, WA
Iraq war: 1,914 and counting
State of play:
Sep 26 15:35:05 reddwarf upsd[4089]: /var/run/nut is world readable
Sep 26 15:35:05 reddwarf upsd[4089]: /etc/ups/upsd.conf is world readable
Sep 26 15:35:05 reddwarf upsd[4089]: Can't connect to UPS
[powermate3105] (upsdrvctl-hiddev0): No such file or directory
Sep 26 15:35:10 reddwarf upsd[4105]: Startup successful
Sep 26 15:35:10 reddwarf upsd[4105]: writepid: fopen
/var/run/nut/upsd.pid: Permission denied
Sep 26 15:35:10 reddwarf upsmon[4108]: Startup successful
Sep 26 15:35:10 reddwarf upsd[4105]: Rejecting TCP connection from 127.0.0.1
Sep 26 15:35:10 reddwarf upsmon[4109]: Set username on [david@reddwarf]
failed: Server disconnected
Sep 26 15:35:20 reddwarf upsmon[4109]: Poll UPS [david@reddwarf] failed
- Write error: Bad file descriptor
Sep 26 15:35:20 reddwarf upsmon[4109]: Communications with UPS
david@reddwarf lost
Sep 26 15:35:20 reddwarf wall[4160]: wall: user nut broadcasted 1 lines
(45 chars)
Sep 26 15:35:30 reddwarf upsd[4105]: Rejecting TCP connection from 127.0.0.1
Sep 26 15:35:30 reddwarf upsmon[4109]: Set username on [david@reddwarf]
failed: Server disconnected
Sep 26 15:35:40 reddwarf upsmon[4109]: Poll UPS [david@reddwarf] failed
- Write error: Bad file descriptor
Does this help any......
david
