On Saturday 24 September 2005 18:43, david walcroft wrote: > Markku Kolkka wrote: > > david walcroft kirjoitti viestissään (lähetysaika sunnuntai, 25. > > > > syyskuuta 2005 00:37): > >># If the UPS is locally attached set it to "yes" > >>SERVER=yes > >># Model of the UPS (filename to call for it, without path) > >># Example - one of > >># apcsmart - APC SMartUPS and similar > >># fentonups - Fenton UPS > >># optiups > >># bestups > >># genericups > >># ups-trust425+625 > >># upsdrvctl > >># You MUST change this, or set SERVER to "no" > >># To support multiple drivers, set MODEL=upsdrvctl > >>MODEL=Powermate-3105 > > > > The "MODEL" parameter does _not_ mean the actual model of your > > ups, you must set it to the nut driver used for your UPS (or > > "upsdrvctl"). > > > >># UPS device - needed if UPS is locally attached > >>DEVICE=/dev/ttyS0 > > > > Wasn't your UPS connected through USB, not the serial port? > > Ok, I'll set up with MODEL=genericups, but I'm not sure what USB uses > for connections <socket> <port> and how to determine the same for a > config file. > > Thanks for all you help Markku. > > david -- To find out where udev is putting your ups, as root run "tail /var/log/message" after plugging the ups into the usb socket, the entry you want will probably contain /dev/ttyUSB1..4. But be warned, it may not always be loaded as the same usb device depending on other usb devices being plugged or unplugged. You will probably have to write a rule for your ups. Take a look at the man page for udev and examine the existing rules in /etc/udev/rules/d to get the idea. It would be a good idea to create a "file" under /dev, sav /dev/ups, and put a symlink pointing to it in the rule. Hope this helps, Tom - Tom Taylor Linux user #263467 Federal Way, WA Iraq war: 1,914 and counting
