David Ganger wrote:
----- Original Message ----- From: <akonstam@xxxxxxxxxxx>
To: "For users of Fedora Core releases" <fedora-list@xxxxxxxxxx>
Sent: Saturday, August 13, 2005 4:15 PM
Subject: Re: Internet isn't accessible after update
On Sat, Aug 13, 2005 at 03:12:16PM -0500, David Ganger wrote:
I just made a fresh install of Fedora Core 3 last night and this
morning found that i couldn't access the internet. I run my internet
connection through a windows system and into a switch, and it (the
windows system) uses DHCP. What i found through more testing is i
could ping all the computers on the lan and even sites on the
internet, like google and msn. If you could help me out that would be
great thanks!
-dave
I think we need a little more clarification about what you are doing.
You imply that this used to work before update to FC3. Is this true?
What was your previous OS.
You say, " I run my internet connection through a windows system ".
Do you mean that the windows system has two interfaces and is somehow
routing packets to your FC3 system? What exactly is the configuration
of these machines.
--
> Yes the internet did work before i used the up2date feature, It had
> windows me and i wiped that off the hard drive and installed Fedora Core
> 3. My internet connection comes into my xp machine and then is shared to
> all the other computers. So I have to nic cards one is hooked up to the
> cable modem, and the other is sent to the router, and that card is
> shared so others can access it. I hope that helps my friend helped me
> set it up so i am not totally sure of all the lingo or how much more you
> need to know, Thanks for the help.
> Dave
Do you really use a switch, or do you use a router? If you
really use a switch, then you need the XP machine there for
some sort of firewall. I'd suggest replacing the switch with
a router (you can get them for < $40 USD these days), and
putting the XP machine behind it. You'll likely have less
exposure that way.
If you are running a router, then it is not a normal setup.
You are using the XP machine as a bridge. My suggestion would
be to put the XP machine behind the router.
The setup I use is:
PSTN ETH ETH
ISP<----->ADSL Modem<------>Router<--+----->Machine 1
|
+----->Machine 2
This is a normal setup, and lets the router do its job.
I think that if you do it this way, you'll have more joy.
You'll need to replace the PSTN connection with your cable
connection, and the ADSL Modem with your Cable Modem.
Do you really have a switch, or d
Mike
--
p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);}
This message made from 100% recycled bits.
You have found the bank of Larn.
I can explain it for you, but I can't understand it for you.
I speak only for myself, and I am unanimous in that!
