i810 issue with 1024x768 on Satellite M30X-S171ST

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello everyone,

I just received my new Toshiba Satellite M30X-S171ST yesterday and
have installed FC4 on it.  It detects all of my hardware ok, but it
boots into 800x600 rather than 1024x768.

I thought that I might need to add that resolution to my xorg.conf
file, and I did, but it did not make a difference.  Then I thought to
check Intel's site for my chip.  From my /var/log/Xorg.0.log I have a:

(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
	i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, 915GM
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Chipset 852GM/855GM found

I found this RPM that I think works with my graphic chipset
http://downloadfinder.intel.com/scripts-df-external/detail_desc.aspx?strstate=live&productid=39&dwnldid=8211&agr=n&lang=eng&prdmap=39

I downloaded it and installed it but received the following errors:

[root@localhost ~]# rpm -i dri-I915-v1.1-20041217.i386.rpm


ERROR: AGPGART module did not compile - AGP module turned off in kernel ??


ERROR: Kernel modules did not compile

The DRI drivers can not be installed without the latest kernel modules.
Installation will be aborted. See the dri.log file for information on
what went wrong.

I can't seem to find a dri.log file to post.  The *weird* part is that
after installing this RPM and rebooting, all of a sudden when X comes
up it's in 1024x768 and works just fine.  But, when I reboot, it's
back to 800x600 just like I never installed it.

I'm not sure what else I need to include.  All I'm trying to do is
have my display set at 1024x768.

Here are all my log & config files that might be of interest.


http://kold.homelinux.com/m30x/xorg.conf
http://kold.homelinux.com/m30x/messages
http://kold.homelinux.com/m30x/dmesg
http://kold.homelinux.com/m30x/boot.log
http://kold.homelinux.com/m30x/Xorg.0.log
http://kold.homelinux.com/m30x/Xorg.0.log.old
http://kold.homelinux.com/m30x/Xorg.setup.log

The RPM I downloaded is at:
http://kold.homelinux.com/m30x/dri-I915-v1.1-20041217.i386.rpm

Please let me know if there's anymore information I can provide.
Any help is greatly appreciated!
-- 
Kevin Old
kevinold@xxxxxxxxx


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux