Hi, the FC4 Setup in graphical mode on this machine: [root@ghim ~]# cat /proc/cpuinfo | egrep '(vendor_id|model|cpu MHz)' vendor_id : GenuineIntel model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.00GHz cpu MHz : 2000.572 [root@ghim ~]# lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT8753 [P4X266 AGP] (rev 01) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] 00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24) 00:0b.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 23) 00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 23) 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev 01) [root@ghim ~]# Does Not work. I must reboot the system 4 or 5 times without turning off the PC just to see a clear graphic interface. The "linux nofb" option passed on boot sequence does not solve the problem. As soon as the setup process is finished I reboot the system and there's a bad X graphic interface, so the o.s. is unusable. After 4 or 6 reboots the graphic interface is loaded correctly and the system work great. I have found on bugzilla for FC4test[23] this Bug: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=153729 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=157556 Is this a known error for FC4 ? there is a bypass or a solution? Many thanks. -- Dario Lesca <d.lesca@xxxxxxxxxx>
