Paul Howarth wrote:
Thomas W. Cranston wrote:
Hi
I am Linux newbie. I am A+ certified (I know-big deal)
I just installed Fedora Core 3 2004-11-03. I used System Settings - Network - Query - entered Password for root - Network Configuration - My USR internal hardware Modem shows up as ppp0.
Nothing happens when I activate it. Its volume is set at very loud.
I can get out on the web using that machine, running Damm Small Linux (DSL)form the CD player and RAM, so that tells me that there is not a hardware problem.
I do not see any way to select authentication methods from the Network Configuration. (PAP, Chat, or CHAP) I do not see an option to configure my modem to .......S4 (comm 5) Where USR Modems usually configure to. This is where I place it when running DSL. I find it odd that a lot of Linux distros automatically configure the modem to .....S0 (comm 1), as most hardware modems are USR (at least in this part of the world), and they configure to ....S4. How do I make these choices?
Now comes the big question
I tried tail -f /var/log/messages, and got permission denied.
I am assuming that I have root permissions, as I created a root password during the installation, as well as a User name and a password. I use my root password to use the network configuration application.
How do I log on as root?
I do not see anywhere to log on as root. After I boot up, I am asked for my user name, and then my password. I do not see anywhere to log on as root.
You can log on as root by using the username "root" instead of your own username, and then enter root's password. However, this is generally a bad thing to do because it's easy to do lots of damage by making mistakes when running as root.
Instead, you could open a terminal window in your regular session and enter the command "su -"; when prompted for the password, enter the root password. This will switch you to root for just that terminal window. You'll be able to run "tail -f /var/log/messages" in that window.
You could also try the command-line program "wvdial" as an option for setting up an Internet connection.
Paul.
logged on as root,& ran wvdial:
[root@localhost -]# wvdial
--> WvDial: Internet dialer version 1.54.0
--> Warning: section [Dialer DeFaults] does not exist in wvdial.conf.
--> Cannot open /dev/modem: No such file of directory
--> Cannot open /dev/modem: No such file of directory
--> Cannot open /dev/modem: No such file of directory
root@localhost -]# wvdialconf
Usage: wvdialconf ,configfile-name>
(create/update a wvdial.config file automatically)
root@localhost -]#I again went to System Settings - Network - Query - entered Password for root - Network Configuration - My USR internal hardware Modem shows up as ppp0.
I will use caps inbetween the following message lines for my comments for clarity, not shouting.
I got these messages:
June 13 18:07:15 localhost ifup-pppd started for choicenet on /dev/ttyS0 at 115200
AS I SUSPECTED, THE MODEM IS CONFIGURED AT ttyS0. IT NEEDS TO BE CONFIGUED AT ttyS4
June 13 18:07:15 localhost pppd [3794]: pppd 2.4.2 started by root, uid 0
June 13 18:07:16 localhost wvdial [3807]: WvDial: Intrnet dialer version 1.54.0
June 13 18:07:16 localhost wvdial [3807]: Initializing modem
June 13 18:07:16 localhost wvdial [3807]: Sending: ATZ
June 13 18:07:21 localhost wvdial [3807]: Sending ATQ0
June 13 18:07:22 localhost wvdial [3807]: Re-Sending: ATZ
June 13 18:07:27 localhost wvdial [3807]: Modem not responding.
June 13 18:07:27 localhost pppd [3794]: Connect script failed
June 13 18:07:28 localhost pppd [3794]: Exit
How do I use wvdial to get out on the web?
How do I use wvdialconf to configure my connection?
Or how do get fedora to properly configure my dialup?
