Nvidia driver now installed and GL screen savers working. Just a note for anyone else. You need to run rpm -ivh rpm1 rpm2 where rpm1 and rpm2 are those mentioned by Christopher below. The two packages are mutually dependent so need installing together. Many thanks Ashley Christopher A. Williams wrote: > > > Better yet, go to http://rpmlivna.org and download their version of the > driver. Its installation routine is much more "Fedora friendly" than the > NVidia installer (uses RPM and doesn't step on other gl libraries). > > For Fedora Core 3, browse to the following directory: > http://rpm.livna.org/fedora/3/i386/RPMS.stable/ > >>From there, you'll need: > 1) kernel-modula-nvidia-<your kernel version>-1.0.7174-0.lvn.1.3.<your > Intel chip>.rpm > > 2) nvidia-glx-1.0.7174-0.lvn.1.3.<your Intel chip>.rpm > > Just download, install and you're pretty much there. > > Alternatively, you can build your own from the source RPM, but > installing these two will do the trick just as well on a FC3 system. > > Good luck! > > Chris > > -- > ====================== > When the solution is simple, > God is answering. > > -- Albert Einstein > > >
