That might be so, but looking at the bugreport (and based on the system I've got running), something isn't right... I've tried RHEL3 (ok), RHEL4 (problem), CentOS4 (problem), Fedora 2 (ok) and Fedora 3 (problem). As long as I stay with the right kernel version there isn't a single problem... Regards, Patrick --- On Tue 05/10, Francois Romieu < romieu@xxxxxxxxxxxxx > wrote: From: Francois Romieu [mailto: romieu@xxxxxxxxxxxxx] To: patrickm@xxxxxxxxx, fedora-test-list@xxxxxxxxxx Date: Wed, 11 May 2005 00:13:27 +0200 Subject: Re: Please read: sym0:0:0:phase change message problem! Patrick <patrickm@xxxxxxxxx> : [...] > People who are running a system using the sym53c8xx controler with SCSI > drives, can't use FC3, FC4t1 or RHEL4 (kernel 2.6.9-5.EL). Also > CentOS4.0 has the same problem, but that's a different story ;-) $ /sbin/lspci -v -s 02:09.0 02:09.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 26) Subsystem: LSI Logic / Symbios Logic LSI53C876/E PCI to Dual Channel SCSI Controller Flags: bus master, medium devsel, latency 144, IRQ 177 I/O ports at d000 [size=256] Memory at feaffc00 (32-bit, non-prefetchable) [size=256] Memory at feafe000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at feac0000 [disabled] [size=128K] Capabilities: <available only to root> $ /sbin/lsmod | grep sym sym53c8xx 79577 12 scsi_transport_spi 19521 1 sym53c8xx scsi_mod 129801 4 sr_mod,sym53c8xx,scsi_transport_spi,sd_mod Smoothly running a 2.6.11-1.14_FC3smp kernel (raid1 + p4 ht). -- Ueimor _______________________________________________ No banners. No pop-ups. No kidding. Make My Way your home on the Web - http://www.myway.com
