Paul Howarth wrote:
On Wed, 2005-05-04 at 11:37 -0700, Barry Yu wrote:
Paul Howarth wrote:
On Tue, 2005-05-03 at 17:16 -0700, Barry Yu wrote:
One machine I installed fc3 in a partition where 25 gb was reserved, I
found that;
Using hardware browser to see that partition, size 25gb was reported (
This is correct size)
Using df -h /dev/hda10;
Filesystem size used Available Used %
Mounted on
/dev/hda10 15g 6.9g 6.9g 51% /
Using fdisk;
Start End Blocks
Id
/dev/hda10 4264 7451 25607578+
83 linux
It looks like you have a 15G filesystem on a 25G partition. Did you
increase the partition size at some point?
What is wrong ? This machine after used for a week, a message telling
that the partition is full (15gb is used up), and I found that under
/mnt/ms/ folder there were still some contents supposed should have been
umounted, even I umount it again, the contents are still there! I think
it has something to do with misreported partition size as above mentioned.
I think the two are unrelated. This probably happened because you copied
some files to /mnt/ms when the filesystem you usually have mounted there
was not mounted, so those files are actually in the root partition.
Paul.
I did not increase partition size ever since I made this partition at 25
gb, and I stalled fc3 on it for 2 weeks and I found this happened.
Let's see if there's a filesystem/partition size mismatch; try this:
# ext2online -v /dev/hda10
If there's a mismatch, this should fix it.
The other thing you can do is:
# df -h
# umount /mnt/ms
# mv /mnt/ms /mnt/ms.old
# mkdir /mnt/ms
# mount /mnt/ms
# df -h
Paul.
It works! tks
