On 4/28/05, Beri, Rohit <linuxlist@xxxxxxxxx> wrote: > Kam Leo wrote: > > >On 4/27/05, Beri, Rohit <linuxlist@xxxxxxxxx> wrote: > > > > > >>Kam Leo wrote: > >> > >> > >> > >>>On 4/25/05, Beri, Rohit <linuxlist@xxxxxxxxx> wrote: > >>> > >>> > >>> > >>>>System > >>>>----------------------- > >>>>K3b Version:0.11.14 > >>>>KDE Version: 3.3.1-2.9.FC3 Red Hat > >>>>QT Version: 3.3.4 > >>>> > >>>>cdrecord > >>>>----------------------- > >>>>/usr/bin/cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2). > >>>>/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns. > >>>>/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler > >>>>/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using > >>>>setpriority(). > >>>>/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns. > >>>>scsidev: '/dev/hdd' > >>>>devname: '/dev/hdd' > >>>>scsibus: -2 target: -2 lun: -2 > >>>>Linux sg driver version: 3.5.27 > >>>>/usr/bin/cdrecord: Warning: using inofficial libscg transport code > >>>>version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c > >>>>1.83 04/05/20 Copyright 1997 J. Schilling'). > >>>>SCSI buffer size: 64512 > >>>>Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 > >>>>Jörg Schilling > >>>>Note: This version is an unofficial (modified) version with DVD support > >>>>Note: and therefore may have bugs that are not present in the original. > >>>>Note: Please send bug reports or support requests to > >>>>http://bugzilla.redhat.com/bugzilla > >>>>Note: The author of cdrecord should not be bothered with problems in > >>>>this version. > >>>>TOC Type: 1 = CD-ROM > >>>>Using libscg version 'schily-0.8'. > >>>>Driveropts: 'burnfree' > >>>>atapi: 1 > >>>>Device type : Removable CD-ROM > >>>>Version : 2 > >>>>Response Format: 2 > >>>>Capabilities : SYNC > >>>>Vendor_info : 'YAMAHA ' > >>>>Identifikation : 'CRW3200E ' > >>>>Revision : '1.0b' > >>>>Device seems to be: Generic mmc CD-RW. > >>>>Current: 0x0009 > >>>>Profile: 0x0008 > >>>>Profile: 0x0009 (current) > >>>>Profile: 0x000A > >>>>Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). > >>>>Driver flags : MMC-3 SWABAUDIO BURNFREE AUDIOMASTER FORCESPEED > >>>>Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R > >>>>Drive buf size : 7469952 = 7294 KB > >>>>FIFO size : 4194304 = 4096 KB > >>>>/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler > >>>>/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using > >>>>setpriority(). > >>>>/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns. > >>>>Track 01: data 152 MB > >>>>Total size: 174 MB (17:19.06) = 77930 sectors > >>>>Lout start: 175 MB (17:21/05) = 77930 sectors > >>>>Current Secsize: 2048 > >>>>ATIP info from disk: > >>>> Indicated writing power: 4 > >>>> Is not unrestricted > >>>> Is not erasable > >>>> Disk sub type: Medium Type A, low Beta category (A-) (2) > >>>> ATIP start of lead in: -11318 (97:31/07) > >>>> ATIP start of lead out: 95475 (21:15/00) > >>>>Disk type: Short strategy type (Phthalocyanine or similar) > >>>>Manuf. index: 22 > >>>>Manufacturer: Ritek Co. > >>>>Blocks total: 95475 Blocks current: 95475 Blocks remaining: 17545 > >>>>Forcespeed is OFF. > >>>>Speed set to 706 KB/s > >>>>Starting to write CD/DVD at speed 4.0 in real SAO mode for single session. > >>>>Last chance to quit, starting real write in 2 seconds. > >>>> 1 seconds. > >>>> 0 seconds. > >>>>Operation starts. > >>>>Waiting for reader process to fill input buffer ... input buffer ready. > >>>>trackno=0 > >>>>BURN-Free is OFF. > >>>>Turning BURN-Free on > >>>>Performing OPC... > >>>>/usr/bin/cdrecord: Success. send opc: scsi sendcmd: no error > >>>>CDB: 54 01 00 00 00 00 00 00 00 00 > >>>>status: 0x2 (CHECK CONDITION) > >>>>Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00 > >>>>Sense Key: 0x3 Medium Error, Segment 0 > >>>>Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0 > >>>>Sense flags: Blk 0 (not valid) > >>>>cmd finished after 8.038s timeout 200s > >>>>/usr/bin/cdrecord: OPC failed. > >>>>Writing time: 11.098s > >>>>/usr/bin/cdrecord: fifo had 64 puts and 0 gets. > >>>>/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was > >>>>100%. > >>>>BURN-Free was never needed. > >>>> > >>>>cdrecord comand: > >>>>----------------------- > >>>>/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdd speed=6 -dao > >>>>driveropts=burnfree -eject -data -tsize=77930s - > >>>> > >>>>mkisofs > >>>>----------------------- > >>>>77930 > >>>>INFO: UTF-8 character encoding detected by locale settings. > >>>>Assuming UTF-8 encoded filenames on source filesystem, > >>>>use -input-charset to override. > >>>> 0.65% done, estimate finish Mon Apr 25 23:28:58 2005 > >>>> 1.29% done, estimate finish Mon Apr 25 23:28:58 2005 > >>>> 1.92% done, estimate finish Mon Apr 25 23:28:58 2005 > >>>>/usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1 > >>>> > >>>>mkisofs comand: > >>>>----------------------- > >>>>/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset > >>>>-appid K3B THE CD KREATOR VERSION 0.11.14 (C) 2003 SEBASTIAN TRUEG AND > >>>>THE K3B TEAM -publisher -preparer K3b - Version 0.11.14 -sysid LINUX > >>>>-volset-size 1 -volset-seqno 1 -sort /tmp/kde-user01/k3bw2LkQb.tmp > >>>>-rational-rock -hide-list /tmp/kde-user01/k3b1NvVua.tmp > >>>>-full-iso9660-filenames -iso-level 2 -path-list > >>>>/tmp/kde-user01/k3beRYWba.tmp > >>>>/home/user01/.kde/share/apps/k3b/temp/dummydir0/ > >>>> > >>>> > >>>> > >>>> > >>>Have you: > >>> > >>>a) Upgraded cdrecord to latest version? > >>>b) Verified permissions for /usr/bin/cdrecord is 755? > >>>c) Upgraded K3b? > >>>d) Use K3bSetup 2 to configure K3b? > >>>e) Try cdrdao? > >>>f) Checked SELinux context and/or upgraded SELinux policies? > >>> > >>> > >>> > >>The system has most updated files. I tested the permissions as well and they are 755... Not sure what else to test/verify... the same hardware with FC2 used to work fine even for some time on FC3... then there was this kernel ugrade and since then (its been a few months now), its stopped working... > >> > >>Thanks, > >> > >> > >> > > > >This kernel upgrade? Please be more specific. Which kernel? > > > >Run the following commands and send back the results: > > > >$ uname -r` > > > > > >$ rpm -q kernel > > > > > >Are you able to boot an older kernel? If so, does K3b work with that kernel? > > > > > > uname -r > 2.6.11-1.14_FC3 > > i have removed all old kernel from the machine... but i guess 2.4 kernel > and early 2.6 were where it worked great... sorry i don't remember > specific patch numbers.... > Do you remember if you could burn CDs using the 2.6.10 kernel? If so you can still download and install it. You can get the rpm from here: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/3/i386/ After you download the file, install it using "rpm -ivh kernel-2.6.10....rpm".
