On Sat, 2005-04-23 at 22:17 +0800, The_Eye_In_The_Sky wrote: > On Sat, 2005-04-23 at 07:11 -0500, akonstam@xxxxxxxxxxx wrote: > > > I suspect you are seeing only the resolutions that are currently in > > the xorg.conf file. You could edit the file and restart X. Or you > > could go to init level 3 and use system-config-display to configure > > the xorg for the resolution you want. Then return to init level 5. > > This assumes you have FC2 or FC3. If you have FC1 respond back for > > a slightly different answer. > > -- > > any idea how to set the refresh rate in the system-config-display other > than editing the xorg.conf manually? Mine is always dropping to > sickening 60Hz when I set to 1280x1024, while I know that in Windows I > can get 85Hz for that resolution. You may want to double check the monitor you are selecting to make sure it's correct ... if there is not a direct listing of your monitor you may want to select one of the "Generic CRT Display" options. Paul
