On Sat, 2005-04-23 at 07:11 -0500, akonstam@xxxxxxxxxxx wrote: > I suspect you are seeing only the resolutions that are currently in > the xorg.conf file. You could edit the file and restart X. Or you > could go to init level 3 and use system-config-display to configure > the xorg for the resolution you want. Then return to init level 5. > This assumes you have FC2 or FC3. If you have FC1 respond back for > a slightly different answer. > -- any idea how to set the refresh rate in the system-config-display other than editing the xorg.conf manually? Mine is always dropping to sickening 60Hz when I set to 1280x1024, while I know that in Windows I can get 85Hz for that resolution. Thanks in advance, TEITS