I installed 2.6.11-1.7_FC3.x86_64 on a dual Opteron 248 (4GB) yesterday (vanilla FC3 kit + up2date) with (so far) no problems. This is on a Tyan K8S Pro S2882 motherboard, booting from a SCSI disk. Similar cpuinfo/meminfo/dmesg to yours, which I'll send if you like. Cheers, Terry. >2.6.11-1.7_FC3.x86_64 hangs somewhere during boot, after dumping CPU >infos, before. >platform infos are attached, as long as a 'fine' dmesg of 2.6.10-1.770 > >PS: which is the correct list for testing kernels ?? > >regards > >processor : 0 >vendor_id : AuthenticAMD >cpu family : 15 >model : 5 >model name : AMD Opteron(tm) Processor 244 >stepping : 10 >cpu MHz : 1792.530 >cache size : 1024 KB >fpu : yes >fpu_exception : yes >cpuid level : 1 >wp : yes >flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 pni syscall nx mmxext lm 3dnowext 3dnow >bogomips : 3522.56 >TLB size : 1088 4K pages >clflush size : 64 >cache_alignment : 64 >address sizes : 40 bits physical, 48 bits virtual >power management: ts fid vid ttp > >processor : 1 >vendor_id : AuthenticAMD >cpu family : 15 >model : 5 >model name : AMD Opteron(tm) Processor 244 >stepping : 10 >cpu MHz : 1792.530 >cache size : 1024 KB >fpu : yes >fpu_exception : yes >cpuid level : 1 >wp : yes >flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 pni syscall nx mmxext lm 3dnowext 3dnow >bogomips : 3579.90 >TLB size : 1088 4K pages >clflush size : 64 >cache_alignment : 64 >address sizes : 40 bits physical, 48 bits virtual >power management: ts fid vid ttp > >MemTotal: 2056668 kB >MemFree: 606164 kB >Buffers: 166492 kB >Cached: 945716 kB >SwapCached: 0 kB >Active: 345700 kB >Inactive: 785104 kB >HighTotal: 0 kB >HighFree: 0 kB >LowTotal: 2056668 kB >LowFree: 606164 kB >SwapTotal: 4096564 kB >SwapFree: 4096564 kB >Dirty: 20 kB >Writeback: 0 kB >Mapped: 27240 kB >Slab: 303136 kB >CommitLimit: 5124896 kB >Committed_AS: 69324 kB >PageTables: 2224 kB >VmallocTotal: 536870911 kB >VmallocUsed: 2800 kB >VmallocChunk: 536867947 kB >HugePages_Total: 0 >HugePages_Free: 0 >Hugepagesize: 2048 kB >PCI devices found: > Bus 0, device 6, function 0: > Class 0604: PCI device 1022:7460 (rev 7). > Master Capable. Latency=64. Min Gnt=10. > Bus 0, device 7, function 0: > Class 0601: PCI device 1022:7468 (rev 5). > Bus 0, device 7, function 1: > Class 0101: PCI device 1022:7469 (rev 3). > Master Capable. Latency=32. > I/O at 0xffa0 [0xffaf]. > Bus 0, device 7, function 2: > Class 0c05: PCI device 1022:746a (rev 2). > IRQ 10. > Master Capable. Latency=64. > I/O at 0xcc00 [0xcc1f]. > Bus 0, device 7, function 3: > Class 0680: PCI device 1022:746b (rev 5). > Master Capable. Latency=64. > Bus 0, device 10, function 0: > Class 0604: PCI device 1022:7450 (rev 18). > Master Capable. Latency=64. Min Gnt=5. > Bus 0, device 10, function 1: > Class 0800: PCI device 1022:7451 (rev 1). > Non-prefetchable 64 bit memory at 0xfebff000 [0xfebfffff]. > Bus 0, device 11, function 0: > Class 0604: PCI device 1022:7450 (rev 18). > Master Capable. Latency=64. Min Gnt=5. > Bus 0, device 11, function 1: > Class 0800: PCI device 1022:7451 (rev 1). > Non-prefetchable 64 bit memory at 0xfebfe000 [0xfebfefff]. > Bus 0, device 24, function 0: > Class 0600: PCI device 1022:1100 (rev 0). > Bus 0, device 24, function 1: > Class 0600: PCI device 1022:1101 (rev 0). > Bus 0, device 24, function 2: > Class 0600: PCI device 1022:1102 (rev 0). > Bus 0, device 24, function 3: > Class 0600: PCI device 1022:1103 (rev 0). > Bus 0, device 25, function 0: > Class 0600: PCI device 1022:1100 (rev 0). > Bus 0, device 25, function 1: > Class 0600: PCI device 1022:1101 (rev 0). > Bus 0, device 25, function 2: > Class 0600: PCI device 1022:1102 (rev 0). > Bus 0, device 25, function 3: > Class 0600: PCI device 1022:1103 (rev 0). > Bus 3, device 0, function 0: > Class 0c03: PCI device 1022:7464 (rev 11). > IRQ 209. > Master Capable. Latency=64. Max Lat=80. > Non-prefetchable 32 bit memory at 0xfeafc000 [0xfeafcfff]. > Bus 3, device 0, function 1: > Class 0c03: PCI device 1022:7464 (rev 11). > IRQ 209. > Master Capable. Latency=64. Max Lat=80. > Non-prefetchable 32 bit memory at 0xfeafd000 [0xfeafdfff]. > Bus 3, device 6, function 0: > Class 0300: PCI device 1002:4752 (rev 39). > IRQ 11. > Master Capable. Latency=64. Min Gnt=8. > Non-prefetchable 32 bit memory at 0xfd000000 [0xfdffffff]. > I/O at 0xb800 [0xb8ff]. > Non-prefetchable 32 bit memory at 0xfeaff000 [0xfeafffff]. > Bus 3, device 8, function 0: > Class 0200: PCI device 8086:1229 (rev 16). > IRQ 201. > Master Capable. Latency=64. Min Gnt=8.Max Lat=56. > Non-prefetchable 32 bit memory at 0xfeafb000 [0xfeafbfff]. > I/O at 0xbc00 [0xbc3f]. > Non-prefetchable 32 bit memory at 0xfeaa0000 [0xfeabffff]. > Bus 2, device 2, function 0: > Class 0104: PCI device 13c1:1002 (rev 0). > IRQ 177. > Master Capable. Latency=64. Min Gnt=9. > I/O at 0xa800 [0xa8ff]. > Non-prefetchable 64 bit memory at 0xfc9ffc00 [0xfc9ffcff]. > Prefetchable 64 bit memory at 0xfa800000 [0xfaffffff]. > Bus 2, device 9, function 0: > Class 0200: PCI device 14e4:1648 (rev 3). > IRQ 185. > Master Capable. Latency=64. Min Gnt=64. > Non-prefetchable 64 bit memory at 0xfc9a0000 [0xfc9affff]. > Non-prefetchable 64 bit memory at 0xfc990000 [0xfc99ffff]. > Bus 2, device 9, function 1: > Class 0200: PCI device 14e4:1648 (rev 3). > IRQ 193. > Master Capable. Latency=64. Min Gnt=64. > Non-prefetchable 64 bit memory at 0xfc9d0000 [0xfc9dffff]. > Non-prefetchable 64 bit memory at 0xfc9c0000 [0xfc9cffff]. > Bus 1, device 1, function 0: > Class 0104: PCI device 13c1:1001 (rev 1). > IRQ 169. > Master Capable. Latency=64. Min Gnt=9. > I/O at 0x9c00 [0x9c0f]. > Non-prefetchable 32 bit memory at 0xfc7ffc00 [0xfc7ffc0f]. > Non-prefetchable 32 bit memory at 0xfb800000 [0xfbffffff]. >Bootdata ok (command line is ro root=LABEL=/) >Linux version 2.6.10-1.770_FC3smp (bhcompile@xxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 SMP Thu Feb 24 18:36:43 EST 2005 >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) > BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data) > BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS) > BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) >Scanning NUMA topology in Northbridge 24 >Number of nodes 2 (10) >Node 0 MemBase 0000000000000000 Limit 000000007fff0000 >Skipping disabled node 1 >Using node hash shift of 24 >Bootmem setup node 0 0000000000000000-000000007fff0000 >No mptable found. >On node 0 totalpages: 524272 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 520176 pages, LIFO batch:16 > HighMem zone: 0 pages, LIFO batch:1 >ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f6bc0 >ACPI: RSDT (v001 A M I OEMRSDT 0x02000525 MSFT 0x00000097) @ 0x000000007fff0000 >ACPI: FADT (v001 A M I OEMFACP 0x02000525 MSFT 0x00000097) @ 0x000000007fff0200 >ACPI: MADT (v001 A M I OEMAPIC 0x02000525 MSFT 0x00000097) @ 0x000000007fff0380 >ACPI: OEMB (v001 A M I OEMBIOS 0x02000525 MSFT 0x00000097) @ 0x000000007ffff040 >ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x000000007fff34e0 >ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @ 0x0000000000000000 >ACPI: Local APIC address 0xfee00000 >ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >Processor #0 15:5 APIC version 16 >ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) >Processor #1 15:5 APIC version 16 >ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) >ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) >ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 >ACPI: IOAPIC (id[0x03] address[0xfebff000] gsi_base[24]) >IOAPIC[1]: apic_id 3, version 17, address 0xfebff000, GSI 24-27 >ACPI: IOAPIC (id[0x04] address[0xfebfe000] gsi_base[28]) >IOAPIC[2]: apic_id 4, version 17, address 0xfebfe000, GSI 28-31 >ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >ACPI: IRQ0 used by override. >ACPI: IRQ2 used by override. >ACPI: IRQ9 used by override. >Setting APIC routing to flat >Using ACPI (MADT) for SMP configuration information >Checking aperture... >CPU 0: aperture @ e0000000 size 32 MB >Aperture from northbridge cpu 0 too small (32 MB) >No AGP bridge found >Built 2 zonelists >Kernel command line: ro root=LABEL=/ console=tty0 >Initializing CPU#0 >PID hash table entries: 4096 (order: 12, 131072 bytes) >time.c: Using 1.193182 MHz PIT timer. >time.c: Detected 1792.530 MHz processor. >Console: colour VGA+ 80x25 >Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) >Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) >Memory: 2056084k/2097088k available (2025k kernel code, 0k reserved, 1240k data, 208k init) >Calibrating delay loop... 3522.56 BogoMIPS (lpj=1761280) >Security Framework v1.0.0 initialized >SELinux: Initializing. >SELinux: Starting in permissive mode >selinux_register_security: Registering secondary module capability >Capability LSM initialized as secondary >Mount-cache hash table entries: 256 (order: 0, 4096 bytes) >CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >CPU: L2 Cache: 1024K (64 bytes/line) >Using local APIC NMI watchdog using perfctr0 >CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >CPU: L2 Cache: 1024K (64 bytes/line) >CPU0: AMD Opteron(tm) Processor 244 stepping 0a >per-CPU timeslice cutoff: 1024.00 usecs. >task migration cache decay timeout: 2 msecs. >Booting processor 1/1 rip 6000 rsp 1007ff85f58 >Initializing CPU#1 >Calibrating delay loop... 3579.90 BogoMIPS (lpj=1789952) >CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >CPU: L2 Cache: 1024K (64 bytes/line) >AMD Opteron(tm) Processor 244 stepping 0a >Total of 2 processors activated (7102.46 BogoMIPS). >Using local APIC timer interrupts. >Detected 12.448 MHz APIC timer. >checking TSC synchronization across 2 CPUs: passed. >time.c: Using PIT/TSC based timekeeping. >Brought up 2 CPUs >checking if image is initramfs... it is >NET: Registered protocol family 16 >PCI: Using configuration type 1 >mtrr: v2.0 (20020519) >ACPI: Subsystem revision 20041105 >ACPI: Interpreter enabled >ACPI: Using IOAPIC for interrupt routing >ACPI: PCI Root Bridge [PCI0] (00:00) >PCI: Probing PCI hardware (bus 00) >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT] >ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) >ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) >ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) >ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) >usbcore: registered new driver usbfs >usbcore: registered new driver hub >PCI: Using ACPI for IRQ routing >** PCI interrupts are no longer routed automatically. If this >** causes a device to stop working, it is probably because the >** driver failed to call pci_enable_device(). As a temporary >** workaround, the "pci=routeirq" argument restores the old >** behavior. If this argument makes the device work again, >** please email the output of "lspci" to bjorn.helgaas@xxxxxx >** so I can fix the driver. >PCI-DMA: Disabling IOMMU. >IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ >audit: initializing netlink socket (disabled) >audit(1112805368.321:0): initialized >Total HugeTLB memory allocated, 0 >VFS: Disk quotas dquot_6.5.1 >Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >SELinux: Registering netfilter hooks >Initializing Cryptographic API >ksign: Installing public key data >Loading keyring >- Added public key B36A0C3CDBFF4E02 >- User ID: Red Hat, Inc. (Kernel Module GPG key) >pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >ACPI: Processor [CPU1] (supports 8 throttling states) >Real Time Clock Driver v1.12 >hpet_acpi_add: no address or irqs in _CRS >Linux agpgart interface v0.100 (c) Dave Jones >serio: i8042 AUX port at 0x60,0x64 irq 12 >serio: i8042 KBD port at 0x60,0x64 irq 1 >Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled >ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >io scheduler noop registered >io scheduler anticipatory registered >io scheduler deadline registered >io scheduler cfq registered >RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize >divert: not allocating divert_blk for non-ethernet device lo >Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 >ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >AMD8111: IDE controller at PCI slot 0000:00:07.1 >AMD8111: chipset revision 3 >AMD8111: not 100% native mode: will probe irqs later >AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio >Probing IDE interface ide0... >hda: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive >elevator: using anticipatory as default io scheduler >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >Probing IDE interface ide1... >Probing IDE interface ide1... >hda: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33) >Uniform CD-ROM driver Revision: 3.20 >ide-floppy driver 0.99.newide >usbcore: registered new driver hiddev >usbcore: registered new driver usbhid >drivers/usb/input/hid-core.c: v2.0:USB HID core driver >mice: PS/2 mouse device common for all mice >input: AT Translated Set 2 keyboard on isa0060/serio0 >input: PS/2 Logitech Mouse on isa0060/serio1 >md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 >NET: Registered protocol family 2 >IP: routing cache hash table of 8192 buckets, 128Kbytes >TCP: Hash tables configured (established 262144 bind 65536) >Initializing IPsec netlink socket >NET: Registered protocol family 1 >NET: Registered protocol family 17 >powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.00.09e) >powernow-k8: MP systems not supported by PSB BIOS structure >powernow-k8: MP systems not supported by PSB BIOS structure >ACPI wakeup devices: >PCI1 USB0 USB1 PS2K PS2M UAR1 UAR2 GOLA GLAN GOLB SMBC AC97 MODM PWRB >ACPI: (supports S0 S1 S4 S5) >CPU0: > domain 0: span 01 > groups: 01 > domain 1: span 03 > groups: 01 02 > domain 2: span 03 > groups: 03 >CPU1: > domain 0: span 02 > groups: 02 > domain 1: span 03 > groups: 02 01 > domain 2: span 03 > groups: 03 >Freeing unused kernel memory: 208k freed >SCSI subsystem initialized >3ware Storage Controller device driver for Linux v1.26.02.000. >ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 29 (level, low) -> IRQ 169 >scsi0 : 3ware Storage Controller >3w-xxxx: scsi0: Found a 3ware Storage Controller at 0x9c00, IRQ: 169. > Vendor: 3ware Model: Logical Disk 0 Rev: 1.2 > Type: Direct-Access ANSI SCSI revision: 00 >SCSI device sda: 160084480 512-byte hdwr sectors (81963 MB) >SCSI device sda: drive cache: write back >SCSI device sda: 160084480 512-byte hdwr sectors (81963 MB) >SCSI device sda: drive cache: write back > sda: sda1 sda2 sda3 sda4 < sda5 sda6 > >Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 >3ware 9000 Storage Controller device driver for Linux v2.26.02.001. >ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 26 (level, low) -> IRQ 177 >scsi1 : 3ware 9000 Storage Controller >3w-9xxx: scsi1: Found a 3ware 9000 Storage Controller at 0xfc9ffc00, IRQ: 177. >3w-9xxx: scsi1: Firmware FE9X 2.02.00.012, BIOS BE9X 2.02.01.037, Ports: 8. > Vendor: 3ware Model: Logical Disk 00 Rev: 1.00 > Type: Direct-Access ANSI SCSI revision: 00 >SCSI device sdb: 2929557504 512-byte hdwr sectors (1499933 MB) >SCSI device sdb: drive cache: write back, no read (daft) >SCSI device sdb: 2929557504 512-byte hdwr sectors (1499933 MB) >SCSI device sdb: drive cache: write back, no read (daft) > sdb: sdb1 >Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 >kjournald starting. Commit interval 5 seconds >EXT3-fs: mounted filesystem with ordered data mode. >security: 3 users, 4 roles, 320 types, 23 bools >security: 53 classes, 10921 rules >SELinux: Completing initialization. >SELinux: Setting up existing superblocks. >SELinux: initialized (dev sda2, type ext3), uses xattr >SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs >SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts >SELinux: initialized (dev mqueue, type mqueue), not configured for labeling >SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling >SELinux: initialized (dev devpts, type devpts), uses transition SIDs >SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts >SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs >SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts >SELinux: initialized (dev pipefs, type pipefs), uses task SIDs >SELinux: initialized (dev sockfs, type sockfs), uses task SIDs >SELinux: initialized (dev proc, type proc), uses genfs_contexts >SELinux: initialized (dev bdev, type bdev), uses genfs_contexts >SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts >SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts >SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts >Floppy drive(s): fd0 is 1.44M >FDC 0 is a post-1991 82077 >tg3.c:v3.14 (November 15, 2004) >ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 185 >divert: allocating divert_blk for eth0 >eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:2d:b6:9a >eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] >ACPI: PCI interrupt 0000:02:09.1[B] -> GSI 25 (level, low) -> IRQ 193 >divert: allocating divert_blk for eth1 >eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:2d:b6:9b >eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] >e100: Intel(R) PRO/100 Network Driver, 3.2.3-k2-NAPI >e100: Copyright(c) 1999-2004 Intel Corporation >ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 18 (level, low) -> IRQ 201 >divert: allocating divert_blk for eth2 >e100: eth2: e100_probe: addr 0xfeafb000, irq 201, MAC addr 00:E0:81:2D:B6:5D >ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) >ACPI: PCI interrupt 0000:03:00.0[D] -> GSI 19 (level, low) -> IRQ 209 >ohci_hcd 0000:03:00.0: OHCI Host Controller >ohci_hcd 0000:03:00.0: irq 209, pci mem 0xfeafc000 >ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 3 ports detected >ACPI: PCI interrupt 0000:03:00.1[D] -> GSI 19 (level, low) -> IRQ 209 >ohci_hcd 0000:03:00.1: OHCI Host Controller >ohci_hcd 0000:03:00.1: irq 209, pci mem 0xfeafd000 >ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2 >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 3 ports detected >md: Autodetecting RAID arrays. >md: autorun ... >md: ... autorun DONE. >ACPI: Power Button (FF) [PWRF] >ibm_acpi: ec object not found >EXT3 FS on sda2, internal journal >device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@xxxxxxxxxx >kjournald starting. Commit interval 5 seconds >EXT3 FS on sda1, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >SELinux: initialized (dev sda1, type ext3), uses xattr >SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs >kjournald starting. Commit interval 5 seconds >EXT3 FS on sda6, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >SELinux: initialized (dev sda6, type ext3), uses xattr >kjournald starting. Commit interval 5 seconds >EXT3 FS on sda5, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >SELinux: initialized (dev sda5, type ext3), uses xattr >kjournald starting. Commit interval 5 seconds >EXT3 FS on sdb1, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >SELinux: initialized (dev sdb1, type ext3), uses xattr >Adding 4096564k swap on /dev/sda3. Priority:-1 extents:1 >SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts >ieee1394: Initialized config rom entry `ip1394' >Linux Kernel Card Services > options: [pci] [cardbus] [pm] >ip_tables: (C) 2000-2002 Netfilter core team >ip_tables: (C) 2000-2002 Netfilter core team >tg3: eth1: Link is up at 100 Mbps, full duplex. >tg3: eth1: Flow control is on for TX and on for RX. >ip_tables: (C) 2000-2002 Netfilter core team >SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >SELinux: initialized (dev autofs, type autofs), uses genfs_contexts >lp: driver loaded but no devices found >NET: Registered protocol family 10 >Disabled Privacy Extensions on device ffffffff803ecf40(lo) >IPv6 over IPv4 tunneling driver >divert: not allocating divert_blk for non-ethernet device sit0 >Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). >SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts >3w-9xxx: scsi1: ERROR: (0x03:0x0104): SGL entry has illegal length:address=0x7A951000, length=0xFF, cmd=X. >eth1: no IPv6 routers present >SELinux: initialized (dev 0:27, type nfs), uses genfs_contexts >Disabled Privacy Extensions on device ffffffff803ecf40(lo) >ip_tables: (C) 2000-2002 Netfilter core team >tg3: eth1: Link is up at 100 Mbps, full duplex. >tg3: eth1: Flow control is on for TX and on for RX. >ip_tables: (C) 2000-2002 Netfilter core team >eth1: no IPv6 routers present >SELinux: initialized (dev 0:28, type nfs), uses genfs_contexts >-- >fedora-list mailing list >fedora-list@xxxxxxxxxx >To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
