Am Sa, den 26.03.2005 schrieb Truls Gulbrandsen um 23:24: > Hi again, > I attach the complete report from smartctl. > > Hopefully this one gives some meaning. Thanks in advance. > > Truls > > > ______________________________________________________________________ > [root@localhost ~]# smartctl -a /dev/hda > smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen > Home page is http://smartmontools.sourceforge.net/ > > === START OF INFORMATION SECTION === > Device Model: IC25N030ATCS04-0 > Serial Number: CSH305DAG9LNRB > Firmware Version: CA3OA71A > User Capacity: 30,005,821,440 bytes > Device is: In smartctl database [for details use: -P show] > ATA Version is: 5 > ATA Standard is: ATA/ATAPI-5 T13 1321D revision 3 > Local Time is: Sat Mar 26 23:20:33 2005 CET > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x00) Offline data collection activity > was never started. > Auto Offline Data Collection: Disabled. The offline testing is off. I think you should enable this: smartctl -o on /dev/hda smartctl -S on /dev/hda [ this one too ] > Self-test execution status: ( 118) The previous self-test completed having > the read element of the test failed. > Total time to complete Offline > data collection: ( 645) seconds. > Offline data collection > capabilities: (0x1b) SMART execute Offline immediate. > Auto Offline data collection on/off support. > Suspend Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > No Conveyance Self-test supported. > No Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > No General Purpose Logging support. > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x000b 095 095 062 Pre-fail Always - 262153 > 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 > 3 Spin_Up_Time 0x0007 152 152 033 Pre-fail Always - 1 > 4 Start_Stop_Count 0x0012 098 098 000 Old_age Always - 3586 > 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 > 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 > 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 > 9 Power_On_Hours 0x0012 082 082 000 Old_age Always - 7956 > 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 > 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1004 > 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 1 > 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 59 > 193 Load_Cycle_Count 0x0012 089 089 000 Old_age Always - 114657 > 194 Temperature_Celsius 0x0002 125 125 000 Old_age Always - 44 (Lifetime Min/Max 18/57) > 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 73 > 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 1 ^^^^^ 1 sector fault > After command completion occurred, registers were: > ER ST SC SN CL CH DH > -- -- -- -- -- -- -- > 40 51 30 58 e2 7a e1 Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552 > SMART Self-test log structure revision number 1 > Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error > # 1 Extended offline Completed: read failure 60% 7954 24781646 > # 2 Extended offline Completed: read failure 60% 7953 24781646 You did now run 2 tests which did no finish. The error sector is given. You may check http://smartmontools.sourceforge.net/BadBlockHowTo.txt Alexander -- Alexander Dalloz | Enger, Germany | GPG http://pgp.mit.edu 0xB366A773 legal statement: http://www.uni-x.org/legal.html Fedora Core 2 GNU/Linux on Athlon with kernel 2.6.10-1.770_FC2smp Serendipity 23:59:04 up 9 days, 21:55, load average: 0.45, 0.44, 0.44
Attachment:
signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil
