Alexander Dalloz wrote:
Am Sa, den 26.03.2005 schrieb Truls Gulbrandsen um 21:00:
Sounds not good. Run on FC3
smartctl -t long /dev/hdX
when it finished
smartctl -a /dev/hdX
to see what S.M.A.R.T. reports.
Alexander
Thanks, Alexander. I am not able to interpretate the output so maybe
you can help med there too? Please see the enclosed file.
______________________________________________________________________
[root@localhost ~]# smartctl -t long /dev/hdX
Self-test execution status: ( 249) Self-test routine in progress...
90% of test remaining.
Alexander
Hi again,
I attach the complete report from smartctl.
Hopefully this one gives some meaning. Thanks in advance.
Truls
[root@localhost ~]# smartctl -a /dev/hda
smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: IC25N030ATCS04-0
Serial Number: CSH305DAG9LNRB
Firmware Version: CA3OA71A
User Capacity: 30,005,821,440 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 3
Local Time is: Sat Mar 26 23:20:33 2005 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 118) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 37) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 095 095 062 Pre-fail Always - 262153
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 152 152 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 098 098 000 Old_age Always - 3586
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 082 082 000 Old_age Always - 7956
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1004
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 1
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 59
193 Load_Cycle_Count 0x0012 089 089 000 Old_age Always - 114657
194 Temperature_Celsius 0x0002 125 125 000 Old_age Always - 44 (Lifetime Min/Max 18/57)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 73
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 62 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 62 occurred at disk power-on lifetime: 7952 hours (331 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 30 58 e2 7a e1 Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 30 58 e2 7a e1 00 00:13:11.600 READ DMA
c8 00 38 50 e2 7a e1 00 00:13:07.300 READ DMA
c8 00 40 48 e2 7a e1 00 00:13:03.000 READ DMA
c8 00 48 40 e2 7a e1 00 00:12:58.600 READ DMA
c8 00 50 38 e2 7a e1 00 00:12:54.200 READ DMA
Error 61 occurred at disk power-on lifetime: 7952 hours (331 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 30 58 e2 7a e1 Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 38 50 e2 7a e1 00 00:13:07.300 READ DMA
c8 00 40 48 e2 7a e1 00 00:13:03.000 READ DMA
c8 00 48 40 e2 7a e1 00 00:12:58.600 READ DMA
c8 00 50 38 e2 7a e1 00 00:12:54.200 READ DMA
c8 00 58 30 e2 7a e1 00 00:12:49.900 READ DMA
Error 60 occurred at disk power-on lifetime: 7952 hours (331 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 30 58 e2 7a e1 Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 40 48 e2 7a e1 00 00:13:03.000 READ DMA
c8 00 48 40 e2 7a e1 00 00:12:58.600 READ DMA
c8 00 50 38 e2 7a e1 00 00:12:54.200 READ DMA
c8 00 58 30 e2 7a e1 00 00:12:49.900 READ DMA
c8 00 60 28 e2 7a e1 00 00:12:45.600 READ DMA
Error 59 occurred at disk power-on lifetime: 7952 hours (331 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 30 58 e2 7a e1 Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 48 40 e2 7a e1 00 00:12:58.600 READ DMA
c8 00 50 38 e2 7a e1 00 00:12:54.200 READ DMA
c8 00 58 30 e2 7a e1 00 00:12:49.900 READ DMA
c8 00 60 28 e2 7a e1 00 00:12:45.600 READ DMA
c8 00 68 20 e2 7a e1 00 00:12:41.200 READ DMA
Error 58 occurred at disk power-on lifetime: 7952 hours (331 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 30 58 e2 7a e1 Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 50 38 e2 7a e1 00 00:12:54.200 READ DMA
c8 00 58 30 e2 7a e1 00 00:12:49.900 READ DMA
c8 00 60 28 e2 7a e1 00 00:12:45.600 READ DMA
c8 00 68 20 e2 7a e1 00 00:12:41.200 READ DMA
c8 00 70 18 e2 7a e1 00 00:12:36.800 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 60% 7954 24781646
# 2 Extended offline Completed: read failure 60% 7953 24781646
Device does not support Selective Self Tests/Logging
[root@localhost ~]#
begin:vcard
fn:Truls Gulbrandsen
n:Gulbrandsen;Truls
email;internet:trulsg@xxxxxxxxxxxx
version:2.1
end:vcard
