On Sunday 20 March 2005 13:54, Shawn Iverson wrote: >On Friday, March 18, 2005 1:44 PM Paul Howarth wrote: >>Paul Howarth wrote: >>> You don't need to recompile the kernel to disable ECN. To do this >>> straight away, do: >>> >>> # echo 0 > /proc/sys/net/ipv4/tcp_ecn >>> >>> However, you may find that "0" is the default value of this >>> parameter before you did this. >>> >>> If not, you can make it the default by adding to >>> /etc/sysctl.conf: >>> >>> net.ipv4.conf.tcp_ecn = 0 >> >>Sorry, that should have been: >> >>net.ipv4.tcp_ecn = 0 >> >>Paul. >> >>-- > >This isn't good. /proc/sys/net/ipv4/tcp_ecn is already 0. Now I am > at a complete loss with this Linksys router as to what could > possibly be happening. There are a few posts on the Internet in > various places discussing latency problems with the BEFSR11 and > Linux, but there aren't any real solutions that I can find. > If all else fails Shawn, hit the linksys site and see if there is an updated firmware for that router. If the existing one is also available, grab it too so you have a fallback if the newer version doesn't work kosher either. These can usually be installed live by using mozilla to access the router itself at its address. They have a built in webserver. >-- > >Shawn -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) 99.34% setiathome rank, not too shabby for a WV hillbilly Yahoo.com and AOL/TW attorneys please note, additions to the above message by Gene Heskett are: Copyright 2005 by Maurice Eugene Heskett, all rights reserved.
