On Friday, March 18, 2005 1:44 PM Paul Howarth wrote: >Paul Howarth wrote: >> >> >> You don't need to recompile the kernel to disable ECN. To do this >> straight away, do: >> >> # echo 0 > /proc/sys/net/ipv4/tcp_ecn >> >> However, you may find that "0" is the default value of this parameter >> before you did this. >> >> If not, you can make it the default by adding to /etc/sysctl.conf: >> >> net.ipv4.conf.tcp_ecn = 0 > >Sorry, that should have been: > >net.ipv4.tcp_ecn = 0 > >Paul. > >-- This isn't good. /proc/sys/net/ipv4/tcp_ecn is already 0. Now I am at a complete loss with this Linksys router as to what could possibly be happening. There are a few posts on the Internet in various places discussing latency problems with the BEFSR11 and Linux, but there aren't any real solutions that I can find. -- Shawn
