Hi All,
got an SCSI external CDRW that is seen in the hardware browser as /dev/scd0. kb3, though, doesn't see it auto or manually. It appears in Disk Management as /dev/cdrom1. How do I mount it.? I have attempted to mount with CDs that contain data and that work with the internal cdrom. Cheers.
[root@localhost root]# mount -t iso9660 /dev/scd0 /mnt/cdrw mount: /dev/scd0 is not a valid block device [root@localhost root]# mount -t iso9660 /dev/hdd /mnt/cdrw mount: /dev/hdd is not a valid block device
[root@localhost root]# cdrecord -scanbus
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to »bugzilla.redhat.com/bugzilla <http://bugzilla.redhat.com/bugzilla>
Note: The author of cdrecord should not be bothered with problems in this version.
Linux sg driver version: 3.5.31
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
cdrecord: No target found.
[root@localhost root]# dmesg | grep -i rom hdc: CD-224E, ATAPI CD/DVD-ROM drive hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ieee1394: Initialized config rom entry `ip1394' Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi1, channel 0, id 5, lun 0 ieee1394: Initialized config rom entry `ip1394'
Something I don't un though, is, it seemed to work once(I think),
[root@localhost cobalt]# mount -t iso9660 /dev/scd0 /mnt/cdrw mount: block device /dev/scd0 is write-protected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/scd0, or too many mounted file systems
Mark Sargent.
