AW: Problem with PCMCIA Network Card

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Anyone here who can help me with this problem or know a mailing-list where i can find help ?

 
Mit freundlichen Grüßen - Kind regards
 
-------------------------------------------------------------------
matrix technology AG
Consultant
Frank Paulick
Landsberger Str. 400-402, D-81241 München
Tel:  +49 - (0)89 - 589395-33
Fax: +49 - (0)89 - 589395-11
Web:    www.matrix.ag
E-mail:  Frank.Paulick@xxxxxxxxx
-------------------------------------------------------------------

E-Mail Disclaimer

Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten 
Adressaten bestimmt. Wenn Sie nicht der vorgesehene Adressat
dieser E-Mail oder dessen Vertreter sein sollten, so beachten Sie
bitte, dass jede Form der Kenntnisnahme, Veröffentlichung, 
Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail 
unzulässig ist. Wir bitten Sie, sich in diesem Fall mit dem 
Absender der E-Mail in Verbindung zu setzen. 

The information contained in this email is intended solely 
for the addressee. Access to this email by anyone else is 
unauthorized. If you are not the intended recipient, any form
of disclosure, reproduction, distribution or any action taken 
or refrained from in reliance on it, is prohibited and may be 
unlawful. Please notify the sender immediately. 



-----Ursprüngliche Nachricht-----
Von: Frank Paulick 
Gesendet: Dienstag, 18. Januar 2005 12:13
An: For users of Fedora Core releases
Betreff: Problem with PCMCIA Network Card


Hi,

I have a problem getting an Netgear WG511 recognized by the system. I had this problem with FC2 and have it still after i installed FC3 FC3 found the PCMCIA Card and installed the prism54 drivers and tries to start them during the boot. For me it looks like a problem on the PCMCIA/hotplug side

Here are some error Messages when i try to do an modprobe prism54:

Jan 16 22:24:36 kernel: PCI: Failed to allocate mem resource #0:2000@e5008000 for 0000:06:00.0 Jan 16 22:24:36 kernel: Loaded prism54 driver, version 1.2 
Jan 16 22:24:36 kernel: PCI: Enabling device 0000:06:00.0 (0000 -> 0002) Jan 16 22:24:36 kernel: ACPI: PCI interrupt 0000:06:00.0[A] -> GSI 11 (level, low) -> IRQ 11 Jan 16 22:24:36 kernel: prism54: PCI device memory region not configured; fix your BIOS or CardBus bridge/drivers Jan 16 22:24:36 kernel: prism54: probe of 0000:06:00.0 failed with error -5

I even tried to install ndiswrapper.
After compiling and installing it i configured it with the windows driver for this card. Modprobe ndiswrapper brought nearly the same error message:

Jan 17 00:47:57 kernel: ndiswrapper version 0.12 loaded (preempt=no,smp=no) Jan 17 00:47:57 kernel: ACPI: PCI interrupt 0000:06:00.0[A] -> GSI 11 (level, low) -> IRQ 11 Jan 17 00:47:57 kernel: PCI: Unable to reserve mem region #1:1000@e5008000 for device 0000:06:00.0 Jan 17 00:47:57 kernel: netwg511: probe of 0000:06:00.0 failed with error -16 
Jan 17 00:47:57 kernel: ndiswrapper: driver netwg511 (NETGEAR,04/06/2004, 2.1.22.0) added

During the boot i get the following messages regard PCMCIA/Cardbus:

Jan 17 01:02:27 kernel: Linux Kernel Card Services
Jan 17 01:02:27 kernel:   options:  [pci] [cardbus] [pm]
Jan 17 01:02:27 kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 Jan 17 01:02:27 kernel: PCI: setting IRQ 9 as level-triggered Jan 17 01:02:27 kernel: ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 9 (level, low) -> IRQ 9 Jan 17 01:02:27 kernel: Yenta: CardBus bridge found at 0000:01:01.0 [1217:6933] Jan 17 01:02:27 kernel: Yenta O2: res at 0x94/0xD4: ea/00 Jan 17 01:02:27 kernel: Yenta O2: enabling read prefetch/write burst Jan 17 01:02:27 kernel: Yenta: ISA IRQ mask 0x00b8, PCI irq 9 Jan 17 01:02:27 kernel: Socket status: 30000410 Jan 17 01:02:27 kernel: ACPI: PCI interrupt 0000:01:01.1[B] -> GSI 11 (level, low) -> IRQ 11 Jan 17 01:02:27 kernel: Yenta: CardBus bridge found at 0000:01:01.1 [1217:6933] Jan 17 01:02:27 kernel: Yenta: ISA IRQ mask 0x00b8, PCI irq 11

This is what lspci -v shows for the PCMCIA-Controller and the NIC:

01:01.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 02) 01:01.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 02)

06:00.0 Network controller: Intersil Corporation Intersil ISL3890 [Prism 
GT/Prism Duette] (rev 01)

01:01.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 02)
        Subsystem: O2 Micro, Inc. OZ6933 Cardbus Controller
        Flags: bus master, stepping, slow devsel, latency 168, IRQ 9
        Memory at e500a000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
        Memory window 0: e5000000-e5001000 (prefetchable)
        Memory window 1: e5002000-e5003000
        I/O window 0: 00004000-000040ff
        I/O window 1: 0000a800-0000ac03
        16-bit legacy interface ports at 0001

01:01.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 02)
        Subsystem: O2 Micro, Inc. OZ6933 Cardbus Controller
        Flags: bus master, stepping, slow devsel, latency 168, IRQ 11
        Memory at e5004000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=01, secondary=06, subordinate=09, sec-latency=176
        Memory window 0: e5005000-e5006000 (prefetchable)
        Memory window 1: e5007000-e5008000
        I/O window 0: 00004400-000044ff
        I/O window 1: 0000b800-0000bc03
        16-bit legacy interface ports at 0001

06:00.0 Network controller: Intersil Corporation Intersil ISL3890 [Prism 
GT/Prism Duette] (rev 01)
        Subsystem: Netgear WG511 Wireless Adapter
        Flags: medium devsel, IRQ 11
        [virtual] Memory at e5008000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 1

Does anyone have an idea what could be the Problem?
Thanx in advance.

 
Mit freundlichen Grüßen - Kind regards
 
-------------------------------------------------------------------
matrix technology AG
Consultant
Frank Paulick
Landsberger Str. 400-402, D-81241 München
Tel:  +49 - (0)89 - 589395-33
Fax: +49 - (0)89 - 589395-11
Web:    www.matrix.ag
E-mail:  Frank.Paulick@xxxxxxxxx
-------------------------------------------------------------------

E-Mail Disclaimer

Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten 
Adressaten bestimmt. Wenn Sie nicht der vorgesehene Adressat dieser E-Mail oder dessen Vertreter sein sollten, so beachten Sie bitte, dass jede Form der Kenntnisnahme, Veröffentlichung, 
Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail 
unzulässig ist. Wir bitten Sie, sich in diesem Fall mit dem 
Absender der E-Mail in Verbindung zu setzen. 

The information contained in this email is intended solely 
for the addressee. Access to this email by anyone else is 
unauthorized. If you are not the intended recipient, any form of disclosure, reproduction, distribution or any action taken 
or refrained from in reliance on it, is prohibited and may be 
unlawful. Please notify the sender immediately. 



-----Ursprüngliche Nachricht-----
Von: Hans Mehlin [mailto:Hans.Mehlin@xxxxxxxx] 
Gesendet: Dienstag, 18. Januar 2005 11:22
An: For users of Fedora Core releases
Betreff: Re: FC3 installation hangs - agpgart?


On Mon, 17 Jan 2005, Dave Jones wrote:

> On Mon, Jan 17, 2005 at 03:37:52PM +0100, Hans Mehlin wrote:
> >
> > I tried to install Fedora Core on a roughly 3 years old Transtec
> > 1001 server (Supermicro motherboard 370DER BIOS 1.1a) but failed.
> >
> > Fedora Core 3 installation hangs directly after a "linux text"
> > Fedora Core 2 installation hangs with repeating messages saying 
> > "agpgart : Posted write buffer flush took morethan 3 seconds" Fedora 
> > Core 1 installation works thus...
> >
> > Any clues?
>
> Try booting with agp=off

Thanks a lot - it worked great!

> I recently fixed some bugs in the serverworks agp driver that could
> explain this, but to be honest, I'm not entirely optimistic. That 
> driver has suffered neglect for way too long, and unless FC4test1 
> works out ok, I'm probably going to disable it entirely.

Let me know if you want me to test it on my system.

   / Hans


> The lack of documentation and test hardware makes it almost impossible
> to debug remotely.
>
> 		Dave


___________________________
HANS MEHLIN
Webmaster (Dr.Med.Sci.)
 
Nobelprize.org
The Nobel Foundation
Box 5232
SE-102 45 Stockholm, Sweden
E-mail hans.mehlin@xxxxxxxx
Tel +46 (0)8 663 26 98
Cellular +46 (0)709 45 66 31
Fax +46 (0)8 663 17 55
Web site nobelprize.org

-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux