(--) PCI: (1:0:0) ATI Technologies Inc Radeon R100 QD [Radeon 7200] rev 0
On many systems the onboard GPU is dsiabled when an addon card is installed. Check the manual for your motherboard.
The BIOS shows internal, PCI, AGP or auto. The radeon used prior had to be used with the vesa for secondary in order to not lockup the server. (7200 woes). The error given for the server lockup, using vesa for the radeon card had the below output. The ati card just is not initialized. The resolution for my internal card is dropped down to some really low resolutions for screen choices. (800x600 or 640x480.)
Anyway, the two cards work with the bios settings. The PCI ATI steals memory from the Intel 815. The radeon card had 32 MB internal memory and the ATI has 16 MB internal memory. Somehow the configuration does not use the internal memory, but overlaps the memory used by the Intel 815 way to achieve its 64 MB system shared memory.
Thanks for the suggestions.
Jim
(II) Primary Device is: PCI 00:02:0 (--) Assigning device section with no busID to primary device (--) Chipset i815 found
...........
(II) Screen 0 shares mem & io resources (II) Screen 1 shares mem & io resources Error in I810WaitLpRing(), now is 44100, start is 42099 pgetbl_ctl: 0x1f400001 pgetbl_err: 0x0 ipeir: 0 iphdr: ef7d0004 LP ring tail: 1ba8 head: 1870 len: f001 start 2ac000 eir: 0 esr: 1 emr: 3d instdone: ff7a instpm: 0 memmode: 4 instps: 810 hwstam: 9ac7 ier: 0 imr: 9ac7 iir: 0 space: 64704 wanted 65528
FatalError re-entered, aborting lockup
