> david walcroft wrote: > > Jim Cornette wrote: > > > >> david walcroft wrote: > >> > >>> Hi, > >>> I have had a scanning problem since moving up to FC3 from FC2 and > >>> that is it is not identified by gimp,kooka and so on. > >>> ptal-init sets it up and :- > >>> > >>> [david@reddwarf ~]$ sane-find-scanner > >>> found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x2811 > >>> [PSC 2100 Series]) at libusb:003:003 > >>> > >>> but : > >>> > >>> [david@reddwarf ~]$ scanimage -L > >>> scanimage: hp-option.c:3710: hp_optset_fix_geometry_options: > >>> Assertion `tl_x && tl_y && br_x && br_y' failed. > >>> Aborted > >>> > >>> software is uptodate > >>> [david@reddwarf ~]$ rpm -q hpoj > >>> hpoj-0.91-11 > >>> [david@reddwarf ~]$ rpm -qa | grep sane > >>> sane-frontends-1.0.12-4 > >>> sane-backends-devel-1.0.14-6 > >>> sane-backends-1.0.14-6 > >>> xsane-gimp-0.92-13 > >>> xsane-0.92-13 > >>> > >>> Any ideas anyone.... > >>> > >>> Thanks david > >>> > >> > >> Try adding the testing repo to your repositories to get the latest > >> programs. I have an hp 2100 scanner and it seems to work alright in FC3. > >> > >> I'm not sure what the hpoj has to do with the scanner. > >> > >> Jim > >> > >> Refer to below bug report for needed packages. > >> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121511 > >> > >> > > Jim > > I just added my 2c to the bug as updating to updates-testing hasn't > > worked,hpoj and > > hpijs together handle print and scan requirements. > > > > Thanks david > > > > I have a scanner that is seperate. It is not a scanner printer > combination. It is an HP 2100C model flatbed scanner and works fine with > the testing versions of the suggested programs installed. > > Since I don't have a combination unit and do not know if there are > seperate usb device nodes for the scanner and another for the printer or > if they use the same usb node for each device. It makes more sense to me > for the devices to have seperate nodes per device. Could it be that the > node for the scanner portion is not being set to the right setting? > > sane-backends-1.0.15-1.4 > hotplug-2004_04_01-8.1 > pam-0.77-66.1 > > Are the program versions that are supposed to get the permissions setup > correctly? It looks like you have these versions installed from the > addition to the bug report. > > Sorry that this remedy couldn't fix your problem. It sounds like hpijs > is not being loaded correctly. You might try searching bugzilla for > multi-function device entries. > > Jim > > I might be able to shed some light on this. The weakest thing about Linux is the extreme lack of documentation. I chalk it up to programmers who learned bad habits. (I used to write shareware over 20 years ago and creating the docs to go with programs was considered normal.) I have an HP PSC1210. The docs for hpoj for these 'All-in-One' scanner/printers state that you can use either the scanner or printer. But not both. You have to log out and log back in to use the the opposite part of this machine. Also, it also seems the driver is using only the color cartridge. Not the B&W cartridge. Lloyd
