I am already running 2.6.9-1.724_FC3. Before 2.6.9-1.724_FC3 pilot-xfer and kpilot wouldn't work either. On Fri, 2005-07-01 at 13:33 -0500, Mike Burger wrote: > There were some issues with some of the kernels that have been released. > The latest kernel revisions for FC2 and FC3 should have that fixed. > > I highly recommend updating your kernel. > > On Fri, 7 Jan 2005, Guy Fraser wrote: > > > When I run "pilot-xfer -S -p /dev/ttyUSB1 -L" I got a complete > > list then both the pda and the command line returned indication > > of a successful completion. I did not try "pilot-xfer -l", does > > it work differently than the command I ran or was what I ran > > sufficient for what you were looking for. > > > > > > On Thu, 2005-06-01 at 23:48 +0100, Emmanuel Seyman wrote: > > > On Thu, Jan 06, 2005 at 10:28:44AM -0700, Guy Fraser wrote: > > > > > > > > I tried the things suggested in this thread without success, > > > > but after setting the communications port to /dev/ttyUSB1 > > > > pilot-xfer and kpilot now both work, but gpilotd-control-applet > > > > doesn't work. > > > > > > Does pilot-xfer work? > > > If you run "pilot-xfer -l", do you get a list of all the pdbs > > > installed on your Palm? > > > > > > Emmanuel > > > > > > > > > -- > Mike Burger > http://www.bubbanfriends.org > > Visit the Dog Pound II BBS > telnet://dogpound2.citadel.org or http://dogpound2.citadel.org > > To be notified of updates to the web site, visit > http://www.bubbanfriends.org/mailman/listinfo/site-update, or send a > message to: > > site-update-request@xxxxxxxxxxxxxxxxx > > with a message of: > > subscribe > -- Guy Fraser Network Administrator The Internet Centre 1-888-450-6787 (780)450-6787