Re: Kernel Sources

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday 05 January 2005 14:22, Markku Kolkka wrote:
> Chadley Wilson kirjoitti viestissään (lähetysaika keskiviikko, 5.
>
> tammikuuta 2005 06:25):
> > > >  4. In resulting tree, the configurations for the specific
> > > > kernels shipped in Fedora Core 3 are in the /configs/
> > > > directory. For example, the i686 SMP configuration file is
> > > > named /configs/kernel-<version>-i686-smp.config. Issue the
> > > > following command to place the desired configuration file
> > > > in the proper place for building:
> > > >
> > > >             cp <desired-file> ./.config
> >
> > Which directory am I supposed to be in when I run this
> > command?
>
> The base of the unpacked kernel source tree created by the
> rpmbuild command in step 3, just as the instructions say ("In
> the resulting tree..."). Did you perform step 3? Without any
> errors?
>
> > Well I have never ever done this, I am following the release
> > notes way, thats all. I am not recompiling the kernel and am
> > not doing anything custom. So in the perfect world situation
> > here which file would you copy?
>
> The file from the configs directory that is right for your
> desired kernel architecture. I'm not telepathic, so I don't know
> which one is right for you.
>
> > Give me some Idea as what it is I am supposed to copy, for all
> > I know I must put a pdf file in configs directory.
>
> You don't _put_ anything in the configs directory, you copy a
> file _from_ the configs directory as the file ".config" in the
> base of the kernel tree.
>
> > Please
> > understand I haven't got a clue as to what is meant by "cp
> > <desired-file>"
>
> You should know the basics of Linux/Unix command line use before
> trying to build a kernel.
>
Look I apologise for my tone, I simply do not understand what the release 
notes are getting at. I am sure when I get it right it will seem stupid to me 
too.

I have a good command line background, but I have never needed to create my 
kernel tree. I have never even needed to recompile a kernel either, so 
understanding where to put things related to the kernel is obviously 
something I need to learn.
The only thing I use it for is modem drivers, which always ask for the 
sources.

I get up to step three with no errors, in step three it tells me which 
directory I should be in. however step four does not say if I must change 
directories or not, 
Since I am using the the stock 2.6.9-1.667 i686 kernel src, there must be a 
proceedure for doing this step by step, I can't see how a standard install on 
my PC will differ from anyone else's PC with a standard install. 
So even if you have a i586 kernel and I have an i686 kernel I am (believe it 
or not) smart enough to know that I am to replace your i586 with my i686.

So all I need to learn how to do, is install the kernel source tree as it was 
in the past with FC1 and 2 , the sources where in /usr/src/linux	and where 
installed from the kernel-sources rpm, which is no longer available.

So in a nut shell 
step 1
download the kernel src rpm  (done no errors)
step2 
install the kernel-<version>.src.rpm (done no errors)
step 3 
cd /usr/src/redhat/SPECS/ and run 
rpmbuild -bp --target=<arch> kernel.spec (done no errors)

[root@check39 SPECS]# uname -a
Linux check39.teq.pinteq 2.6.9-1.667 #1 Tue Nov 2 14:41:25 EST 2004 i686 i686 
i386 GNU/Linux

[root@check39 chadley]# rpm -Uvh kernel-2.6.9-1.667.src.rpm
   1:kernel                 ########################################### [100%]
[root@check39 chadley]# cd /usr/src/redhat/SPECS/
[root@check39 SPECS]# rpmbuild -bp --target=i686 kernel-2.6.spec
Building target platforms: i686
Building for target i686
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.21838
+ umask 022

<snipped lots of output>

+ find . -name '*~' -exec rm -fv '{}' ';'
+ exit 0
[root@check39 SPECS]#

step4 
[root@check39 SPECS]# cd ../BUILD/kernel-2.6.9/linux-2.6.9/configs/
[root@check39 configs]# ls
kernel-2.6.9-i586.config  kernel-2.6.9-i586-smp.config  
kernel-2.6.9-i686.config  kernel-2.6.9-i686-smp.config
[root@check39 configs]#

The config I need is the kernel-2.6.9-i686.config which I must copy to 
somewhere as .config 
The question now is where.
I do not have a /usr/src/linux directory must I create one or is this 
different? Does it exist somewhere else or is it called something else!
locate does not find it either, I have run updatedb too.


what do I do now?

Thanks

--
Chadley Wilson
Redhat Certified Technician 
Cert Number: 603004708291270
Pinnacle Micro
Manufacturers of Proline Computers
====================================
Exercise freedom, Use LINUX
=====================================


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux