On Thu, 2004-12-30 at 21:33 -0500, Robert L Cochran wrote: > Whenever I plug in my A-Data USB flash drive, these messages appear in > /var/log/messages. Is there a fix for the errors? > > Dec 30 21:24:18 bobcp4 kernel: usb 1-5: new high speed USB device using > address 5 > Dec 30 21:24:18 bobcp4 kernel: scsi6 : SCSI emulation for USB Mass > Storage devices > Dec 30 21:24:18 bobcp4 kernel: Vendor: USB 2.0 Model: Flash > Disk Rev: 0.00 > Dec 30 21:24:18 bobcp4 kernel: Type: > Direct-Access ANSI SCSI revision: 02 > Dec 30 21:24:18 bobcp4 kernel: SCSI device sdc: 1024000 512-byte hdwr > sectors (524 MB) > Dec 30 21:24:18 bobcp4 kernel: sdc: Write Protect is off > Dec 30 21:24:18 bobcp4 kernel: sdc: assuming drive cache: write through > Dec 30 21:24:18 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code > = 8000002 > Dec 30 21:24:18 bobcp4 kernel: Sense class 7, sense error 0, extended > sense 0 > Dec 30 21:24:19 bobcp4 kernel: sdc: sdc1 > Dec 30 21:24:19 bobcp4 kernel: Attached scsi removable disk sdc at > scsi6, channel 0, id 0, lun 0 > Dec 30 21:24:19 bobcp4 scsi.agent[7069]: disk at > /devices/pci0000:00/0000:00:02.2/usb1/1-5/1-5:1.0/host6/6:0:0:0 > Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code > = 8000002 > Dec 30 21:24:19 bobcp4 kernel: Sense class 7, sense error 0, extended > sense 0 > Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code > = 8000002 > Dec 30 21:24:19 bobcp4 kernel: Sense class 7, sense error 0, extended > sense 0 > Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code > = 8000002 > Dec 30 21:24:19 bobcp4 kernel: Sense class 7, sense error 0, extended > sense 0 > Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code > = 8000002 > Dec 30 21:24:19 bobcp4 kernel: Sense class 7, sense error 0, extended > sense 0 > Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code > = 8000002 > Dec 30 21:24:19 bobcp4 kernel: Sense class 7, sense error 0, extended > sense 0 > Dec 30 21:24:19 bobcp4 fstab-sync[7156]: added mount point > /media/usbdisk for /dev/sdc1 > Dec 30 21:24:19 bobcp4 kernel: SCSI error: host 6 id 0 lun 0 return code > = 8000002 > Dec 30 21:24:19 bobcp4 kernel: Sense class 7, sense error 0, extended > sense 0 > > This is on an MSI K8N Neo2 Platinum (Socket 939 -- AMD 64) motherboard. > I am running Fedora Core 3 x86_64, which is kept fully up-to-date with > the latest updates, on this. I also see the same messages on a Pentium 4 > system I just installed Fedora Core 3 (x86) on. That system is also > fully up-to-date. > Have you tried mounting /media/usbdisk or /dev/sdc1? It did assign a device name and mount point so it may work well in spite of the errors in the log. I am not using the 64bit processor or kernel but my usb flash drive works well. > Thanks > > Bob Cochran >