Hi
I'm new to this list. I checked the archives and found a similar question asked, but not answered (I don't think).
I'm trying to upgrade a working system from FC2 to FC3. It's an APPRO rack server, with dual athlon MP and a 2 channel SCSI which is a Adaptec AIC-7899P U160/m (aic7xxx). And I have one disk installed with ID=0 on the first channel.
I get in trouble when I get to the loading aic7xxx stage; and this happens whether I use expert or noprobe or neither.
Eventually after a long time, it proceeds to the next step, but there are no disks visible.
I can look at the logs:
anacron.log (screen Alt-F3)
...
* finished bus probing
* ignoring network device 3Com Corporation 3c980-C 10/100baseTX NIC [Python-T] (
3c59x)
* ignoring network device 3Com Corporation 3c980-C 10/100baseTX NIC [Python-T] (
3c59x)
* ignoring storage device Adaptec AIC-7899P U160/m (aic7xxx)
* ignoring storage device Adaptec AIC-7899P U160/m (aic7xxx)
* ignoring usb device Advanced Micro Devices [AMD] AMD-768 [Opus] USB (ohci-hcd)
* ignoring storage device Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (unkno
wn)
* modules to insert
* load module set done
* specified args of aic7xxx=reverse_scan:1 for aic7xxx
* modules to insert aic7xxx
* loaded aic7xxx from /modules/modules.cgz
* inserted /tmp/aic7xxx.ko
* load module set done
and syslog (screen Alt-F4)
.... <6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <4> <Adaptec aic7899 Ultra160 SCSI adapter> <4> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs <4>
and then for channel 0, id 0
<4>scsi0:0:0:0: Attempting to queue an ABORT message
<4>CDB: 0x12 0x0 0x0 0x0 0x24 0x0
<4>scsi0: At time of recovery, card was not paused
<4>>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
<4>scsi0: Dumping Card State while idle, at SEQADDR 0x18
<4>Card was paused
<4>ACCUM = 0x3, SINDEX = 0x48, DINDEX = 0xe4, ARG_2 = 0x0
<4>HCNT = 0x0 SCBPTR = 0x0
<4>SCSIPHASE[0x0] SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0]
<4>LASTPHASE[0x1] SCSISEQ[0x1a] SBLKCTL[0xa] SCSIRATE[0x0]
<4>SEQCTL[0x10] SEQ_FLAGS[0xc0] SSTAT0[0x0] SSTAT1[0x0]
<4>SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x8] SIMODE1[0xa4]
<4>SXFRCTL0[0x80] DFCNTRL[0x0] DFSTATUS[0x89]
<4>STACK: 0x0 0x163 0x178 0x17
<4>SCB count = 4
<4>Kernel NEXTQSCB = 2
<4>Card NEXTQSCB = 2
<4>QINFIFO entries:
<4>Waiting Queue entries: 0:3
<4>Disconnected Queue entries:
<4>QOUTFIFO entries:
<4>Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 2
1 22 23 24 25 26 27 28 29 30 31
<4>Sequencer SCB Info:
<4> 0 SCB_CONTROL[0x40] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0x3]
<4> 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 16 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 17 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 18 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 19 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 20 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 21 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 22 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 23 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 24 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 25 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 26 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 27 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 28 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 29 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 30 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4> 31 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
<4>Pending list:
<4> 3 SCB_CONTROL[0x40] SCB_SCSIID[0x7] SCB_LUN[0x0]
<4>Kernel Free SCB list: 1 0
<4>Untagged Q(0): 3
<4>DevQ(0:0:0): 0 waiting
<4>
<4><<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
<4>scsi0:0:0:0: Cmd aborted from QINFIFO
<4>aic7xxx_abort returns 0x2002
<4>scsi0:0:0:0: Attempting to queue a TARGET RESET message
<4>CDB: 0x12 0x0 0x0 0x0 0x24 0x0
<4>scsi0:0:0:0: Command not found
<4>aic7xxx_dev_reset returns 0x2002
<6>scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0
lun 0
followed by unsuccesfull attempts on each the remaining 15+16 ids. At which points the installer goes to the next screen.
I'm hoping for some advice on what to do. Tony
