On Mon, 2004-12-06 at 01:43, Christian Del Pino wrote: > Okay, now that it looks that it is writing CDs, I went to burn the first > iso image of fc3. Here is what I received using cdrecord: > Success. read buffer: scsi sendcmd: no error > CDB: 3C 00 00 00 00 00 00 FC 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 04 00 00 00 00 10 87 69 65 80 08 03 00 00 > Sense Key: 0x4 Hardware Error, Segment 0 > Sense Code: 0x08 Qual 0x03 (logical unit communication crc error > (ultra-dma/32)) Fru 0x0 > Sense flags: Blk 0 (not valid) > resid: 64512 > cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler > cdrecord: Permission denied. WARNING: Cannot set priority using > setpriority(). > cdrecord: WARNING: This causes a high risk for buffer underruns. > cdrecord: fifo was 0 times empty and 47 times full, min fill was 79%. > > It seems to burn small files with no problem, but when I use large > files, I get the same message. I see the same issue here. I suspect it's due to either the newer kernel or a cdrecord. try lowering down your burn speed. 8x works for my 24x laptop Burner. anything over that, I'll make coasters. > > I have tried searching through the archives, but I couldn't find issue > similar to mine. Oh.. there are.. There certainly are... -- Ow Mun Heng Gentoo/Linux on D600 1.4Ghz Neuromancer 10:59:31 up 2:01, 6 users, 0.24, 0.61, 0.48
