On Thu, 2004-11-18 at 00:20 -0500, Mathew S. Nowend wrote: > Hey Marc, > > Thanks for the URL however that is where I got my original information on > how to configure my xorg.conf I did look in the /var/log/Xorg.0.log for x > server startup errors and I didn't notice any there was also a backup file > as well and I didn't notice any in there either. However I think the reason > is because when I was trying to get back in to reset my init level to 3 I > somehow got X to reboot and it asked if I wanted for it to try to attempt to > reconfigure and I said yes. So it may have cleared the logs. So it is using > the default drivers at this point or so it says but if I go into xorg.conf > it shows the nvidia driver is being used. I am really baffled at this point. > > > Thanks again for all your help, > > Mathew Well...at least we seem to be looking in the same places... :-) If you have already searched the FC list archives, you might want to try posting over at the nVidia Linux forums: http://www.nvnews.net/vbulletin/forumdisplay.php?s=&forumid=14 Another place to check would be at the Dell Linux Forums: http://forums.us.dell.com/supportforums/board?board.id=sw_linux Again, from what I can tell, it appears that the modeline specs are the ticklish part of the process, so hopefully someone with a successful experience will have some insight. Marc
