Re: screen goes black when x starts

Parrish Myers wrote:

Hello,

I have been searching bugzilla and the web for hours... does anyone have a solution for the screen going blank when x starts...

I have a ze4315us laptop with a radeon IGP320 and XGA 15" display.

Thanks

Your model is the exact same as I am using. I have an upgraded installation from Severn through present. Is yours a fresh installation?

Anyway, since exact same machine types, here is my xorg.conf file. (attached). If this does not look similar to your setup, something might be missing other than configuration tools not doing things correctly.

Also, I run with acpi=on in my grub.conf file. The BIOS has been upgraded twice since the box was used. Maybe a BIOS upgrade is needed.

I have not rebooted since upgrading the xorg-x11 packages though. Is this a new problem introduced after the upgrade?

Jim

--
To err is human, to forgive is against company policy.

# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "single head configuration"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"
	Load  "synaptics"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "LCD Panel 1024x768"
	HorizSync    31.5 - 48.5
	VertRefresh  40.0 - 70.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "radeon"
	VendorName  "Videocard vendor"
	BoardName   "ATI Radeon Mobility U1"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     16
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection