Edit /etc/sysconfig/network-scripts/ifcfg-eth0 and add the following
lines to the end of the file.
check_link_down () {
return 1;
}
Once the file is saved, restart the network service.
Nathaniel Hall, GSEC
Intrusion Detection and Firewall Technician
Ozarks Technical Community College -- Office of Computer Networking
halln@xxxxxxx
417-447-7535
AlilouLinux wrote:
Hello the list,
I installed Red Hat 9 (the same problem exist within fedora) under Windows
with the assistance of the VMware software.
I encountered a problem: The network card eth0 does not be mounted. Even
when I test the software of the network management.
The system give me the following messages:
Mounting eth0: failed
It is impossible to activate eth0
definition of IP information for eth0 failed. No link is found. Check
the cable?
Whereas when I leave the VMware software (return under Windows), the network
exists. Do you have a solution or explanations? Thank you
__________
Aliloulinux
