On Saturday 13 Nov 2004 23:25, Alexander Dalloz wrote: > Am Sa, den 13.11.2004 schrieb Vinicius um 23:56: > > Are the alarms below correct, please? > > > > "$ sensors > > w83627hf-isa-0290 > > Adapter: ISA adapter > > VCore 1: +1.50 V (min = +0.00 V, max = +0.00 V) ALARM > > VCore 2: +1.73 V (min = +0.00 V, max = +0.00 V) ALARM > > There are no boundary values for min and max. > > > +3.3V: +3.23 V (min = +3.14 V, max = +3.47 V) > > +5V: +4.97 V (min = +4.76 V, max = +5.24 V) ALARM > > Between min and max - can't explain the alarm. > > > +12V: +11.86 V (min = +10.82 V, max = +13.19 V) ALARM > > Here too. > > > -12V: +1.54 V (min = -13.18 V, max = -10.80 V) > > -5V: +2.59 V (min = -5.25 V, max = -4.75 V) > > V5SB: +5.38 V (min = +4.76 V, max = +5.24 V) > > VBat: +2.35 V (min = +2.40 V, max = +3.60 V) > > fan1: 2934 RPM (min = -1 RPM, div = 2) > > fan2: 0 RPM (min = 14062 RPM, div = 32) ALARM > > fan3: 0 RPM (min = -1 RPM, div = 2) ALARM > > No fan rotation detected. > > > temp1: +40°C (high = -32°C, hyst = +16°C) sensor = > > PII/Celeron diode > > temp2: +7.5°C (high = +80°C, hyst = +75°C) sensor = > > thermistor > > temp3: -4.5°C (high = +122°C, hyst = +121°C) sensor = > > thermistor > > ERROR: Can't get VID data! Is due to changes in the kernel etc, this is fixed with lm_sensors 2.8.8 and the latest kernel tree (I2C changes), not sure about Fedora's kernel though or what version of lm_sensors is with FC3, Run "sensors" again, some of the Alarms may go (the ones that are set right) once things have settled down, especially after a reboot. > Ok here too. > > > beep_enable: > > Sound alarm disabled > > > > eeprom-i2c-0-50 > > Adapter: SMBus I801 adapter at e800 > > Memory type: DDR SDRAM DIMM > > Memory size (MB): 256" > > You should customize / adjust the /etc/sensors.conf. FYI, when you make changes to sensors.conf (its quite well documented in the file) to see the changes straight away you need to run "sensors -s" and then "sensors" for the changes to take affect. Colin -- Fedora Core 2, Custom Built Kernel 2.6.9-ck3 KDE-Redhat-3.3.1-0.2.2.kde Registered Linux user number #342953
