Em Sáb, 2004-11-13 às 23:41 +0100, Alexander Dalloz escreveu:
> Am Sa, den 13.11.2004 schrieb Colin J Thomson um 23:23:
>
> > Hmm, thats good advice Alexander, I have a few things in rc.local to load at
> > boot time (that do not use or need an init file).
> > I was not aware of the lm_sensors.init script though :(
> > Is it really required to be a service? Surley this should of been done right
> > by the RPM packagers if it is needed.
>
> > Colin
>
> I wouldn't enforce lm_sensors need to be configured as a service. It is
> just my personal taste - some sort of that :) - that as using a System V
> system one should configure things with (chkconfig compatible) init
> scripts where ever possible. Sure many things do simple work too if
> invoked by rc.local.
>
> Yes, I think it would be nice if the lm_sensors RPM maintainer would
> have a look at it.
>
> At Vinicius: it does not matter whether FC2 or FC3. I actually still run
> FC2 and can't tell you for sure which changes to the example init script
> from the docs directory are needed to let lm_sensors initialize as a
> service.
>
> Alexander
>
Thanks a lot!
It's working fine, I think.
Are the alarms below correct, please?
"$ sensors
w83627hf-isa-0290
Adapter: ISA adapter
VCore 1: +1.50 V (min = +0.00 V, max = +0.00 V) ALARM
VCore 2: +1.73 V (min = +0.00 V, max = +0.00 V) ALARM
+3.3V: +3.23 V (min = +3.14 V, max = +3.47 V)
+5V: +4.97 V (min = +4.76 V, max = +5.24 V) ALARM
+12V: +11.86 V (min = +10.82 V, max = +13.19 V) ALARM
-12V: +1.54 V (min = -13.18 V, max = -10.80 V)
-5V: +2.59 V (min = -5.25 V, max = -4.75 V)
V5SB: +5.38 V (min = +4.76 V, max = +5.24 V)
VBat: +2.35 V (min = +2.40 V, max = +3.60 V)
fan1: 2934 RPM (min = -1 RPM, div = 2)
fan2: 0 RPM (min = 14062 RPM, div = 32) ALARM
fan3: 0 RPM (min = -1 RPM, div = 2) ALARM
temp1: +40°C (high = -32°C, hyst = +16°C) sensor =
PII/Celeron diode
temp2: +7.5°C (high = +80°C, hyst = +75°C) sensor =
thermistor
temp3: -4.5°C (high = +122°C, hyst = +121°C) sensor =
thermistor
ERROR: Can't get VID data!
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm disabled
eeprom-i2c-0-50
Adapter: SMBus I801 adapter at e800
Memory type: DDR SDRAM DIMM
Memory size (MB): 256"
TIA, Vinicius.
